Product Finder

Product Finder

Our Product Finder tool allows you to find the perfect product for your requirements.

Triton CDS PB (T3CDSPB) | Ex e, Ex d, Ex nR, Ex ta | Explosive Atmosphere Cable Gland For all types of Lead Sheathed Armoured Cables

Globally Approved, Explosive Atmosphere Cable Gland

• Effectively earths / grounds lead sheathed cables
• Fully sequential, three step installation procedure
• Direct & remote installation
• Unique compensating displacement seal system (CDS)
– Metal-to-metal installation every time regardless of lead sheath diameter
• Designed to prevent Coldflow, see CMP Technical Document TS002 
• Integral protected deluge seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• -60°C to +130°C
• Globally marked, IECEx, ATEX, UL & cCSAus
• EMC tested

† Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).

Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a single layer of armour such as SWA the clamping range should be used as shown in the table below. Stepped (W) Cone is suitable for Single Wire Armour (SWA), or Aluminium Wire Armour (AWA) cables.

For under / oversized armour wires click here

Design SpecificationBS 6121:Part 1:1989, IEC 62444, EN 62444
Mechanical Classifications*Impact = Level 8, Retention = Class D
Enclosure ProtectionIK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications *Category B (Category A when used with braid, tape or pliable wire armour cables)
ATEX CertificateSIRA13ATEX1073X
SIRA13ATEX4079X
Code of Protection II 2G,II 1D, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da,
II 3G Ex nR IIC Gc, I M2, Ex d I Mb, Ex e I Mb
Compliance StandardsEN60079-0,1,7,15,31
IECEx CertificateIECEx SIR 13.0028X
IECEx SIM 14.0007X
Code of ProtectionEx d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I Mb, Ex e I Mb
Compliance StandardsIEC 60079-0,1,7,15,31
EAC CertificateC-GB.AA87.B.00487
NEPSI CertificateGYJ13.1141X , GYJ13.1283X
CCOE / PESO (India) CertificateP333688
INMETRO CertificateTÜV 11.0374X
RETIE Certificate03866
Marine ApprovalsLRS: 01/00172 (E3), DNV: TAE00000Y, ABS: 14-LD234401A-4-PDA, BV: 43180/A1BV
Ingress Protection Rating **IP66, IP67 & IP68
Deluge Protection ComplianceDTS01 : 91
Cable Gland MaterialBrass, Electroless Nickel Plated Brass, Aluminium, Stainless Steel
Seal MaterialCMP SOLO LSF Halogen Free Thermoset Elastomer
Cable TypeLead Sheathed & Single Wire Armour (LC/SWA), Lead Sheathed & Aluminium Wire Armour (LC/AWA), Lead Sheathed & Wire Braid Armour (LC/SWB), Lead Sheathed & Pliable Wire Armour (LC/PWA), Lead Sheathed & Steel Tape Armour (LC/STA), Lead Sheathed & Aluminium Strip Armour (LC/ASA)
Armour ClampingReversible Armour Cone & AnyWay Universal Clamping Ring
Sealing TechniqueInner Bedding Sealing Ring: Compensating Displacement Seal (CDS), Outer Sheath Sealing Ring : Load Retention Seal (LRS)
Sealing Area(s)Cable Inner Bedding & Outer Cable Sheath
Optional AccessoriesLocknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Optional Installation ToolsSpanners

Note: * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** When CMP installation accessories are used. Refer to Maintaining a Seal for further information.
*** IP68 tested to a minimum depth of 30 metres for 12 hours, alternate depths / durations can be provided upon request

Certificates

Click hereClick here to view Certificates

Product Selection Table

Click here to view Technical Illustration

Technical Illustration

Click here to view how to order

Cable Gland SizeAvailable Entry Threads “C” (Alternate Metric Thread Lengths Available)Lead Sheath Diameter “A”Overall
Cable
Diameter
“B”
Armour RangeAcross
Flats
“D”
Across
Corners
“D”
Protrusion
Length “F”
Combined Ordering Reference
(*Brass Metric)
ShroudCable
Gland
Weight
(Kgs)
StandardOptionGrooved
Cone (X)
Stepped Cone (W)
MetricThread Length (Metric) “E”NPTThread Length
(NPT) “E”
NPTMinMaxMinMaxMinMaxMinMaxMaxMaxSizeTypeOrdering
Suffix
20S16M200.59½”0.78¾"0.120.310.240.520.010.040.030.050.941.043.1020S16T3CDSPB1RAPVC367.05
20SM200.59½”0.78¾"0.240.430.370.630.010.040.030.050.941.043.1020ST3CDSPB1RAPVC367.05
20M200.59½”0.78¾"0.260.530.490.820.020.040.030.051.201.323.0020T3CDSPB1RAPVC069.88
25SM250.59¾”0.801"0.440.760.550.870.020.050.050.061.481.633.5025ST3CDSPB1RAPVC0915.52
25M250.59¾”0.801"0.440.760.721.030.020.050.050.061.481.633.4925T3CDSPB1RAPVC0915.52
32M320.590.981 ¼"0.671.000.931.330.020.050.060.081.811.993.5732T3CDSPB1RAPVC1122.58
40M400.591 ¼”1.011 ½"0.871.231.101.590.020.060.060.082.172.383.6740T3CDSPB1RAPVC1532.10
50SM500.591 ½”1.032"1.161.461.391.840.020.060.080.102.362.603.9650ST3CDSPB1RAPVC1839.86
50M500.591.062 ½"1.401.681.592.090.020.060.080.102.763.044.1750T3CDSPB1RAPVC2156.79
63SM630.591.062 ½"1.581.911.802.340.020.060.080.102.953.254.0463ST3CDSPB1RAPVC2361.38
63M630.592 ½”1.573"1.862.132.152.590.020.060.080.103.153.464.1563T3CDSPB1RAPVC2563.14
75SM750.592 ½”1.573"2.082.372.322.830.020.060.080.103.543.904.3575ST3CDSPB1RAPVC2891.01
75M750.591.633 ½"2.332.572.633.090.020.060.100.123.944.334.7475T3CDSPB1RAPVC30117.82
90M900.943 ½”1.694"2.623.043.003.560.030.060.120.164.534.985.4790T3CDSPB1RAPVC32172.49
100M1000.943 ½”1.694"2.993.473.393.990.030.060.120.165.005.505.05100T3CDSPB1RALSF33176.02
115M1150.944"1.735"3.393.704.004.340.030.060.120.165.435.986.35115T3CDSPB1RALSF34273.37
130M1300.945"1.84-3.824.334.344.850.030.060.120.166.186.806.82130T3CDSPB1RALSF35346.04
Dimensions are displayed in inches unless otherwise stated
Cable Gland SizeAvailable Entry Threads “C” (Alternate Metric Thread Lengths Available)Lead Sheath Diameter “A”Overall
Cable
Diameter
“B”
Armour RangeAcross
Flats
“D”
Across
Corners
“D”
Protrusion
Length “F”
Combined Ordering Reference
(*Brass Metric)
ShroudCable
Gland
Weight
(Kgs)
StandardOptionGrooved
Cone (X)
Stepped Cone (W)
MetricThread Length (Metric) “E”NPTThread Length
(NPT) “E”
NPTMinMaxMinMaxMinMaxMinMaxMaxMaxSizeTypeOrdering
Suffix
20S16M2015.0½”19.9¾"3.17.86.113.10.31.00.81.324.026.478.720S16T3CDSPB1RAPVC360.20
20SM2015.0½”19.9¾"6.111.09.515.90.31.00.81.324.026.478.720ST3CDSPB1RAPVC360.20
20M2015.0½”19.9¾"6.513.412.520.90.41.00.81.330.533.676.220T3CDSPB1RAPVC060.28
25SM2515.0¾”20.21"11.119.314.022.00.41.21.31.637.541.388.825ST3CDSPB1RAPVC090.44
25M2515.0¾”20.21"11.119.318.226.20.41.21.31.637.541.388.725T3CDSPB1RAPVC090.44
32M3215.025.01 ¼"17.025.523.733.90.41.21.62.046.050.690.732T3CDSPB1RAPVC110.64
40M4015.01 ¼”25.61 ½"22.031.227.940.40.41.61.62.055.060.593.240T3CDSPB1RAPVC150.91
50SM5015.01 ½”26.12"29.537.235.246.70.41.62.02.560.066.0100.750ST3CDSPB1RAPVC181.13
50M5015.026.92 ½"35.642.640.453.00.61.62.02.570.177.1105.850T3CDSPB1RAPVC211.61
63SM6315.026.92 ½"40.148.545.659.40.61.62.02.575.082.5102.563ST3CDSPB1RAPVC231.74
63M6315.02 ½”39.93"47.254.254.665.80.61.62.02.580.088.0105.463T3CDSPB1RAPVC251.79
75SM7515.02 ½”39.93"52.860.259.072.00.61.62.02.590.099.0110.675ST3CDSPB1RAPVC282.58
75M7515.041.53 ½"59.165.266.778.40.61.62.53.0100.0110.0120.375T3CDSPB1RAPVC303.34
90M9024.03 ½”42.84"66.677.176.290.30.81.63.24.0115.0126.5138.990T3CDSPB1RAPVC324.89
100M10024.03 ½”42.84"76.088.186.1101.40.81.63.24.0127.0139.7128.2100T3CDSPB1RALSF334.99
115M11524.04"44.05"86.094.1101.5110.20.81.63.24.0138.0151.8161.3115T3CDSPB1RALSF347.75
130M13024.05"46.8-97.0110.1110.2123.20.81.63.24.0157.0172.7173.3130T3CDSPB1RALSF359.81
Dimensions are displayed in millimetres unless otherwise stated