November, 2017
New Fire Resistant Cleats withstand Temperatures up to 1,000C and hold ‘Extreme’ Loads
...
Read MoreFire Rated Cable Cleats
Introducing the Solace, Themis & Helios
CMP’s fire-performance cable cleats Themis, Solace & Helios
This new range launches as the use of fire-resistant power cable and control cable systems for life safety and fire-fighting applications has become more prevalent in everyday use.
This product range is not only suitable for fire safety applications, but also highly corrosive environments where high grade stainless steel products should be used, or applications where high axial / lateral loads are required, such as the vertical installation of large high voltage cables (Themis only).
Jump to products
Tested to the Highest Industry Fire Safety Standards
Fire tested to EN50200, BS5839, BS8491, BS8434 and AS 3013, CMP’s fire-rated range has been specifically designed for use with fire performance cables to ensure the safe retention and securing of cables in the event of a wiring system being affected by fire.
BS 5839 ‘Fire detection and fire alarm systems for buildings. Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises’ states that “Methods of cable support should be non-combustible and such that circuit integrity will not be reduced below that afforded by the cable used, and should withstand a similar temperature and duration to that of the cable, while maintaining adequate support.” To adhere to this, BSI standard fire rated Cable Cleats must be used to support the cable in the event of a fire.
High Quality Material & Temperature Rating
Available in cast and fabricated 316L stainless steel, the one and two bolt range has been rigorously tested to withstand temperatures of over 1000°C, whilst providing the superior corrosion resistance that 316L stainless steel affords, making it suitable for not only indoor and outdoor applications but highly corrosive environments too.
Extreme Axial & Lateral Load Retention
As well as offering superior fire-resistance, both the Themis and Solace have been designed with a unique twin arc internal patent pending design profile, offering extreme axial and lateral load retention. Please visit the individual product pages for 3rd party test data
Make an enquiry today
We'd like to keep in touch
We have some exciting things in the pipeline - if you'd like to be the first to know please enter your email address below.
Frequently Asked Questions
Are accessories available for these cleats?
C-clamps (for unslotted rungs) and separation pads (to isolate dissimilar metals) are available for all products excluding the intermediate restraint
Are these products LUL approved?
All CMP cable cleats hold LUL 1-085 approvals