Product Finder

Product Finder

Our Product Finder tool allows you to find the perfect product for your requirements.

Sabre Plastic Cable Cleat

The CMP Products Sabre One Bolt single cable cleat is a non-metallic cable cleat which has been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ (IEC 61914:2009). It ensures the retention and securing of single cables, without damaging or deforming the cable. The cable cleat is manufactured from various materials making it suitable for both indoor and outdoor applications. Due to its unique twin arc internal patent pending design profile it exhibits excellent retention, limiting both the axial and lateral cable movement. The Sabre One Bolt cable cleat is available in ten sizes suitable for cable diameters of 10mm up to 57mm. This cable cleat has an M10 clearance hole for securing it to a mounting surface.

  • Third party certification to IEC 61914:2009
  • Available in Nylon, Low Smoke & Fume (LSF) V0 Nylon & LUL approved polymer
  • Sunlight (UV) & weather resistant
  • Operating temperature -40°C to +60°C
  • 10 – 57mm in 10 sizes
  • Excellent axial & lateral load retention
  • Single bolt fixing design
Short Circuit Testing to IEC 61914:2009 - Clause 9.5
Multicore FormationParallel Formation
One short circuit (6.4.3) 600mm fixed cleat centresTwo short circuits (6.4.4) 600mm fixed cleat centresOne short circuit (6.4.3) 600mm fixed cleat centres 105mm cable centres
0.1 sec0.1 sec0.1 sec
113kA Peak99kA Peak68kA Peak
51.3kA RMS47.1kA RMS32.3kA RMS
Type Type 6.1.2. Non Metallic 1BC - One Bolt Cable
Design Specification IEC 61914:2009
Temperature for permanent application -40°C to +60°C
IEC 61914:2009 clause / part 6.2
Needle Flame Test Pass - 120 second flame application time
IEC 61914:2009 clause
10.0, 10.1, IEC 60695-11-5
Lateral Load Test 1kN - 1.25kN
IEC 61914:2009 clause 9.3
Axial Load Test 0.5kN-1kN
IEC61914:2009 clause 9.4
Impact Resistance Pass - Very Heavy
IEC 61914:2009 clause 6.3, 6.3.5, 9.2
UV Resistance Pass
IEC 61914:2009 clause, 11.1
Material Nylon, V0 nylon & LUL approved polymer**
Material Colour Black

**For lateral and axial load ratings or Short circuit ratings of LUL polymer products, please contact CMP.

Product Selection Table

Click here to view Technical Illustration

Technical Illustration

Part No
Cable Ø range
take (in.)
Dimensions (in.)Weight
W *(LUL +5%)
WHDEFixing Hole Ø
1BC10130.394 - 0.5121.6141.3391.8110.5121 x M100.81
1BC13160.512 - 0.6301.7321.4571.8110.5121 x M100.92
1BC16190.630 - 0.7481.8501.5751.8110.5121 x M101.06
1BC19230.748 - 0.9062.0081.7321.8110.5121 x M101.20
1BC23270.906 - 1.0632.1261.8901.8110.5121 x M101.34
1BC27321.063 - 1.2602.4022.2051.8110.5121 x M101.66
1BC32381.260 - 1.4962.6382.4411.8110.5121 x M101.87
1BC38461.496 - 1.8112.9532.8741.8110.5121 x M102.40
1BC46511.811 - 2.0083.1893.0311.8110.5121 x M102.79
1BC51572.008 - 2.2443.3863.2681.8110.5121 x M103.10
Part No
Cable Ø range
take (mm)
Dimensions mmWeight
W *(LUL +5%)
WHDEFixing Hole Ø
1BC101310 - 1341. x M1023
1BC131613 - 1644. x M1026
1BC161916 - 1947. x M1030
1BC192319 - 2351. x M1034
1BC232723 - 2754. x M1038
1BC273227 - 3261. x M1047
1BC323832 - 3867. x M1053
1BC384638 - 4675. x M1068
1BC465146 - 5181. x M1079
1BC515751 - 5786. x M1088