Product Finder

Product Finder

Our Product Finder tool allows you to find the perfect product for your requirements.

Reliance Standard Duty Aluminum Cable Cleat

CMP Reliance cable cleats are metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard ‘Cable Cleats for Electrical Installations’ IEC 61914 to ensure the securing and retention of cables, without sustaining damage to the cable(s).

The Reliance range of cable cleats are fabricated from 5000 series aluminium and are available in 24 sizes to suit cable diameters 19mm to 128mm.

The Reliance cable cleat has three M10 fixing clearance holes within one base, allowing versatility to the installer during installation to use either one M10 bolt or two M10 bolts, and is designed to enable the product to be secured to a variety of mounting surfaces. The Reliance cable cleats hinge opens fully allowing the cables to be easily placed within the cable cleat to aid the installer before closing and securing via the mouth piece bolt.

The Reliance cable cleats come with standard liners, helping to restrain the cable(s) within vertical applications, This provides a layer of protection between the cable sheath and the cable cleat during normal operation, where thermal elongation of cables occur, protecting the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The liners also assist in the extra protection of cable(s) in the event of short circuit fault conditions. The standard liners supplied are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free.


  • Third party certification to IEC 61914
  • 5000 series aluminium
  • 3mm material thickness
  • 19 – 128mm in 24 sizes for trefoil formation / application
  • Short circuit rating of 106kA peak fault
  • Operating temperature -50°C to +60°C
  • Standard liners which are classified as Low
  • Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free
  • Combined single (M10) or two bolt (M10) fixing design
Short Circuit Testing to IEC 61914 - Clause 9.5
Trefoil Formation
One short circuit (6.4.3) 300mm fixed cleat centresOne Short Circuit (6.4.3) 300mm fixed cleat centres
0.1 sec1.0 sec
106kA Peak70kA Peak
50.5kA RMS33.3 RMS
Cable Ø 38 mmCable Ø 38 mm
Type 6.1.3 Composite SDAL - Aluminium
Design Specification IEC 61914
Temperature for permanent application -50°C to +60°C
IEC 61914
Needle Flame Test Pass - 120 second flame application time
IEC 61914, IEC 60695-11-5
Lateral Load Test Refer to CMP Products
Axial Load Test Refer to CMP Products
Impact Resistance Pass - Very heavy IEC 61914
Material 5000 Series Aluminium with Standard Liner
Standard liners are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free

Product Selection Table

Click here to view Technical Illustration

Technical Illustration

Reliance Part No.Cable Ø Range Take (in)Dimensions (in)Weight (oz)
WHDPFixing Hole Ø
SDAL0190230.74-0.904.013.432.120.982 x M101 x M109.17
SDAL0230280.90- x M101 x M1010.05
SDAL0270321.06- x M101 x M1010.37
SDAL0310351.22-1.374.334.062.120.982 x M101 x M1010.65
SDAL0340381.33-1.494.404.212.120.982 x M101 x M1010.83
SDAL0370421.45-1.655. x M101 x M1012.59
SDAL0410461.61-1.815.354.452.121.962 x M101 x M1012.91
SDAL0450501.77-1.965.434.762.121.962 x M101 x M1013.26
SDAL0490551.92-2.165.5152.121.962 x M101 x M1013.76
SDAL0520582.04-2.285.595.122.121.962 x M101 x M1014.04
SDAL0560592.20-2.325.665.162.121.962 x M101 x M1014.78
SDAL0560622.20-2.446.265.432.122.952 x M101 x M1015.8
SDAL0600662.63-2.596.265.752.122.952 x M101 x M1015.91
SDAL0640702.52-2.756.376.022.122.952 x M101 x M1016.26
SDAL0680742.67-2.916.496.32.122.952 x M101 x M1016.61
SDAL0720782.83-3.076.696.572.122.952 x M101 x M1017.04
SDAL0760822.99-3.227.556.892.122.952 x M101 x M1019.01
SDAL0800863.15-3.387.717.172.122.952 x M101 x M1019.29
SDAL0840903.30-3.547.837.42.122.952 x M101 x M1019.54
SDAL0900983.54-3.858. x M101 x M1020.32
SDAL0981033.85-4.058.508.462.122.952 x M101 x M1020.95
SDAL1031114.05-4.379.409.022.122.952 x M101 x M1023.39
SDAL1111194.37-4.689.849.612.122.952 x M101 x M1024.13
SDAL1191284.68-5.0310.5110.242.122.952 x M101 x M1025.4
Reliance Part No.Cable Ø Range Take (mm)Dimensions (mm)Weight (g)
WHDPFixing Hole ø
SDAL01902319-231028754252 x M101 x M10260
SDAL02302823-281068854252 x M101 x M10285
SDAL02703227-321089754252 x M101 x M10294
SDAL03103531-3511010354252 x M101 x M10302
SDAL03403834-3811210754252 x M101 x M10307
SDAL03704237-4213410854502 x M101 x M10357
SDAL04104641-4613611354502 x M101 x M10366
SDAL04505045-5013812154502 x M101 x M10376
SDAL04905549-5514012754502 x M101 x M10390
SDAL05205852-5814213054502 x M101 x M10398
SDAL05605956-5914413154502 x M101 x M10419
SDAL05606256-6215913854752 x M101 x M10448
SDAL06006660-6615914654752 x M101 x M10451
SDAL06407064-7016215354752 x M101 x M10461
SDAL06807468-7416516054752 x M101 x M10471
SDAL07207872-7817016754752 x M101 x M10483
SDAL07608276-8219217554752 x M101 x M10539
SDAL08008680-8619618254752 x M101 x M10547
SDAL08409084-9019918854752 x M101 x M10554
SDAL09009890-9820820554752 x M101 x M10576
SDAL09810398-10321621554752 x M101 x M10594
SDAL103111103-11123922954752 x M101 x M10663
SDAL111119111-11925024454752 x M101 x M10684
SDAL119128119-12826726054752 x M101 x M10720