Thorus (SSCAL) High Voltage Single/Parallel Saddle Cable Cleat

The THORUS cable support cleat has been designed, constructed and tested in accordance with the International Standard IEC 61914 cable cleats for electrical installations; to ensure the securing and retention of cables, without sustaining damage to the cable(s).

Designed to support cables in high voltage applications, the THORUS allows cable sag between fixed anchor points, where desirable. Sagging cable between fixed anchor points is a method of installation where the cable is allowed to hang between the cleats. This area of excess cable will accommodate thermal expansion and contraction of the cable in service, without putting undue stress on the anchor
points.

The THORUS adds additional support to the cable at the anchor points, ensuring there is no excessive pressure or point loading to the cable in these critical areas. The system is designed so that the support arm and cleat area can swivel and rotate, allowing flexibility to the installer.

The THORUS comes in three lengths; 400mm, 600mm and 800mm. This will accommodate larger cable cleat fixing centers, whilst reducing the pressure applied to the cable from its own weight.

The product can be fabricated to suit any installation parameters. Please contact CMP to discuss your specific project requirements.

Features

  • Third party tested in accordance with IEC 61914
  • Corrosion resistant aluminium
  • Sunlight (UV) resistant
  • Operating temperature -60°C to +60°C
  • Allows cable sag between fixed anchor points
  • No excessive pressure points to the cable
  • Increased support reducing pressure on cable
  • Strong but lightweight construction
SHORT CIRCUIT TESTING TO IEC 61914 - CLAUSE 9.5
PARALLEL FORMATION
One short circuit 8.4m,
with intermediate restraints
Two short circuit 8.4m,
with intermediate restraints
800mm conductor centres800mm conductor centres
1 sec1 sec
168 kA Peak124 kA RMS
66 kA r.m.s48 kA r.m.s
Type IEC 61914 6.1.3 Composite
Design Specification IEC 61914
Temperature for permanent application -60°C to + 60°C
IEC 61914 clause 6.2
Needle Flame Test Pass - 120 seconds
IEC 61914 clause 10.0, 10.1, IEC 60695-11-5
Impact Resistance Pass - Very Heavy
IEC 61914 clause 6.3, 6.3.5, 9.2
Material 5000 & 6000 Series Aluminium
Liner Material FR LSF / LSOH Polymer
Cable Formation Single/Parallel
Jump to technical illustration    Fixing Pack Information

Product Selection Table

THORUS Part No.Cable Range Take (inch)Length (inch)HWLL2W2BASE FIXINGWeight (oz)
SSCAL-100110-4003.94 - 4.3315.757.957.6815.753.543.341 x M16125.47
SSCAL-100110-6003.94 - 4.3323.627.957.6823.623.543.341 x M16161.31
SSCAL-100110-8003.94 - 4.3331.507.957.6831.503.543.341 x M16197.15
SSCAL-110120-4004.33 - 4.7215.758.358.0715.753.543.341 x M16129.46
SSCAL-110120-6004.33 - 4.7223.628.358.0723.623.543.341 x M16166.56
SSCAL-110120-8004.33 - 4.7231.508.358.0731.503.543.341 x M16203.60
SSCAL-120130-4004.72 - 5.1215.758.748.4615.753.543.341 x M16133.44
SSCAL-120130-6004.72 - 5.1223.628.748.4623.623.543.341 x M16171.64
SSCAL-120130-8004.72 - 5.1231.508.748.4631.503.543.341 x M16209.84
SSCAL-130140-4005.12 - 5.5115.759.138.8615.753.543.341 x M16137.50
SSCAL-130140-6005.12 - 5.5123.629.138.8623.623.543.341 x M16176.90
SSCAL-130140-8005.12 - 5.5131.509.138.8631.503.543.341 x M16216.44
SSCAL-140150-4005.51 - 5.9115.759.539.2515.753.543.341 x M16141.55
SSCAL-140150-6005.51 - 5.9123.629.539.2523.623.543.341 x M16182.08
SSCAL-140150-8005.51 - 5.9131.509.539.2531.503.543.341 x M16222.65
SSCAL-150160-4005.91 - 6.3015.759.929.6515.753.543.341 x M16145.68
SSCAL-150160-6005.91 - 6.3023.629.929.6523.623.543.341 x M16187.41
SSCAL-150160-8005.91 - 6.3031.509.929.6531.503.543.341 x M16229.21
SSCAL-160170-4006.30 - 6.6915.7510.3110.0415.753.543.341 x M16149.77
SSCAL-160170-6006.30 - 6.6923.6210.3110.0423.623.543.341 x M16192.67
SSCAL-160170-8006.30 - 6.6931.5010.3110.0431.503.543.341 x M16235.70
SSCAL-170180-4006.69 - 7.0915.7510.7110.4315.753.543.341 x M16153.87
SSCAL-170180-6006.69 - 7.0923.6210.7110.4323.623.543.341 x M16198.13
SSCAL-170180-8006.69 - 7.0931.5010.7110.4331.503.543.341 x M16242.47
SSCAL-180190-4007.09 - 7.4815.7511.1010.8315.753.543.341 x M16158.10
SSCAL-180190-6007.09 - 7.4823.6211.1010.8323.623.543.341 x M16203.32
SSCAL-180190-8007.09 - 7.4831.5011.1010.8331.503.543.341 x M16248.96
SSCAL-190200-4007.48 - 7.8715.7511.5011.2215.753.543.341 x M16162.08
SSCAL-190200-6007.48 - 7.8723.6211.5011.2223.623.543.341 x M16208.72
SSCAL-190200-8007.48 - 7.8731.5011.5011.2231.503.543.341 x M16255.24
THORUS Part No.Cable Range Take (mm)Length (mm)HWLL2W2BASE FIXINGWeight (g)
SSCAL-100110-400100-1104002021954009084.81 x M163557
SSCAL-100110-600100-1106002021956009084.81 x M164573
SSCAL-100110-800100-1108002021958009084.81 x M165589
SSCAL-110120-400110-1204002122054009084.81 x M163670
SSCAL-110120-600110-1206002122056009084.81 x M164722
SSCAL-110120-800110-1208002122058009084.81 x M165772
SSCAL-120130-400120-1304002222154009084.81 x M163783
SSCAL-120130-600120-1306002222156009084.81 x M164866
SSCAL-120130-800120-1308002222158009084.81 x M165949
SSCAL-130140-400130-1404002322254009084.81 x M163898
SSCAL-130140-600130-1406002322256009084.81 x M165015
SSCAL-130140-800130-1408002322258009084.81 x M166136
SSCAL-140150-400140-1504002422354009084.81 x M164013
SSCAL-140150-600140-1506002422356009084.81 x M165162
SSCAL-140150-800140-1508002422358009084.81 x M166312
SSCAL-150160-400150-1604002522454009084.81 x M164130
SSCAL-150160-600150-1606002522456009084.81 x M165313
SSCAL-150160-800150-1608002522458009084.81 x M166498
SSCAL-160170-400160-1704002622554009084.81 x M164246
SSCAL-160170-600160-1706002622556009084.81 x M165462
SSCAL-160170-800160-1708002622558009084.81 x M166682
SSCAL-170180-400170-1804002722654009084.81 x M164362
SSCAL-170180-600170-1806002722656009084.81 x M165617
SSCAL-170180-800170-1808002722658009084.81 x M166874
SSCAL-180190-400180-1904002822754009084.81 x M164482
SSCAL-180190-600180-1906002822756009084.81 x M165764
SSCAL-180190-800180-1908002822758009084.81 x M167058
SSCAL-190200-400190-2004002922854009084.81 x M164595
SSCAL-190200-600190-2006002922856009084.81 x M165917
SSCAL-190200-800190-2008002922858009084.81 x M167236

Technical Illustration