Endurance (SDSS-C)

The Endurance cable cleats are metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard IEC 61914: Cable cleats for electrical installations, to ensure the securing and retention of cables, without sustaining damage to the cables.

The range is fabricated from 316L stainless steel in 24 sizes from 17 – 128mm.

The top opening is designed to fit more cleats installed side by side, whilst three M10 fixing clearance holes within each base, allow the versatility of installing with either one M10 bolt or two M10 bolts. This enables installation of the Endurance to a variety of mounting surfaces.

The hinge of the Endurance opens fully, allowing cables to be easily placed within the cable cleat, before closing and securing via the mouth piece bolt.

Liners come as standard which help to restrain the cable(s) within vertical applications. Where thermal elongation of cables occurs, the liner also provides a layer of protection between the cable sheath and the cable cleat during normal operation. This additional layer protects the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The liners also assist in the extra protection of cable(s) in the event of short circuit fault conditions. The standard liners supplied are classified as Low Smoke and Fume Zero Halogen (LSF0H), Phosphorus-free.

FEATURES

• Third party certification to IEC 61914
• 316L stainless steel
• 17 – 128mm in 24 sizes for trefoil formation / application
• Short circuit rating of 140kA peak fault
• Operating temperature -50°C to +60°C
• Standard Polymer Liners are classified as Low Smoke and Fume Zero Halogen (LSF0H), Phosphorus-free
• Combined single (M10) or two bolt (M10) fixing design

SHORT CIRCUIT TESTING TO IEC 91614 - CLAUSE 9.5
TREFOIL INFORMATION
One short circuit 300mm fixed cleat centresTwo short circuits 300mm fixed cleat centresOne short circuit 300mm fixed cleat centres
0.1 sec0.1 sec1 sec
140kA Peak135kA Peak80.1kA Peak
63.6kA r.m.s61.4kA r.m.s38.5kA r.m.s
SHORT CIRCUIT TESTING TO IEC 61914 - CLAUSE 9.5
TREFOIL FORMATION
One short circuit 600mm fixed cleat centresTwo short circuits 600mm fixed cleat centresOne short circuit 600mm fixed cleat centresTwo short circuits 600mm fixed cleat centres
0.1 sec0.1 sec1 sec1 sec
109kA Peak109kA Peak75.1kA Peak74.8kA Peak
51.9kA r.m.s51.9kA r.m.s35.7kA r.m.s35.6kA r.m.s
Type 6.1.3 Composite SDSS-C Standard Duty Stainless Steel
Design Specification IEC 61914
Temperature for permanent application -50ºC to +60ºC
IEC 61914 clause 6.2
Needle Flame Test Pass -120 second flame application time IEC 61914 clause 10.0, 10.1, IEC 60695-11-5
Lateral Load Test Refer to CMP Products, IEC 61914 clause 9.3
Axial Load Test 0.6kN, IEC 61914 clause 9.4
Impact Resistance Pass - Very Heavy
IEC 61914 clause 6.3, 6.3.5, 9.2
Material 316L Stainless Steel with Standard Polymer Liner
Standard Polymer Liners are classified as Low Smoke and Fume Zero Halogen (LSF0H), Phosphorus-free
Jump to technical illustration    Fixing Pack Information

Product Selection Table

ENDURANCE PART NO.CABLE Ø RANGE TAKE (in)DIMENSIONS (in)WEIGHT (oz)
WHDPFIXING HOLE Ø
D1D2
SDSSC-0170210.121-0.8273.0713.4652.1260.9842 x M101 x M1011.89
SDSSC-0190240.122-0.9453.1103.5042.1260.9842 x M101 x M1012.31
SDSSC-0230280.122-1.1023.1103.7802.1260.9842 x M101 x M1012.45
SDSSC--0270320.127-1.2603.2284.0942.1260.9842 x M101 x M1012.59
SDSSC-0300350.130-1.3783.3074.3312.1260.9842 x M101 x M1012.95
SDSSC-0330380.150-1.4963.8194.6062.1260.9842 x M101 x M1013.37
SDSSC-0360420.175-1.6544.4494.8432.1261.9692 x M101 x M1015.66
SDSSC-0400460.178-1.8114.5285.1572.1261.9692 x M101 x M1016.12
SDSSC-0440500.181-1.9694.6065.4722.1261.9692 x M101 x M1016.65
SDSSC-0480550.191-2.1654.8435.8272.1261.9692 x M101 x M1017.25
SDSSC-0510580.197-2.2835.0006.0632.1261.9692 x M101 x M1017.74
SDSSC-0550620.228-2.4415.7876.3392.1262.9532 x M101 x M1019.75
SDSSC-0590660.234-2.5985.9456.6542.1262.9532 x M101 x M1020.21
SDSSC-0630700.239-2.7566.0636.9692.1262.9532 x M101 x M1020.71
SDSSC-0670740.243-2.9136.1817.2442.1262.9532 x M101 x M1021.23
SDSSC-0710780.250-3.0716.3397.5592.1262.9532 x M101 x M1021.62
SDSSC-0740820.296-3.2287.5207.8352.1262.9532 x M101 x M1024.23
SDSSC-0770850.298-3.3467.5598.0712.1262.9532 x M101 x M1024.80
SDSSC-0820880.299-3.4657.5988.2682.1262.9532 x M101 x M1025.08
SDSSC-0880960.316-3.7808.0318.8582.1262.9532 x M101 x M1025.86
SDSSC-0961030.336-4.0558.5439.4092.1262.9532 x M101 x M1026.63
SDSSC-1031110.366-4.3709.29110.0002.1262.9532 x M101 x M1030.09
SDSSC-1111190.388-4.6859.84310.5912.1262.9532 x M101 x M1031.18
SDSSC-1191280.414-5.03910.51211.2202.1262.9532 x M101 x M1032.28
ENDURANCE PART NO.CABLE Ø RANGE TAKE (mm)DIMENSIONS (mm)WEIGHT (g)
WHDPFIXING HOLE Ø
D1D2
SDSSC-01702117-21788854252 x M101 x M10337
SDSSC-01902419-24798954252 x M101 x M10349
SDSSC-02302823-28799654252 x M101 x M10353
SDSSC--02703227-328210454252 x M101 x M10357
SDSSC-03003530-358411054252 x M101 x M10367
SDSSC-03303833-389711754252 x M101 x M10379
SDSSC-03604236-4211312354502 x M101 x M10444
SDSSC-04004640-4611513154502 x M101 x M10457
SDSSC-04405044-5011713954502 x M101 x M10472
SDSSC-04805548-5512314854502 x M101 x M10489
SDSSC-05105851-5812715454502 x M101 x M10503
SDSSC-05506255-6214716154752 x M101 x M10560
SDSSC-05906659-6615116954752 x M101 x M10573
SDSSC-06307063-7015417754752 x M101 x M10587
SDSSC-06707467-7415718454752 x M101 x M10602
SDSSC-07107871-7816119254752 x M101 x M10613
SDSSC-07408274-8219119954752 x M101 x M10687
SDSSC-07708577-8519220554752 x M101 x M10703
SDSSC-08208882-8819321054752 x M101 x M10711
SDSSC-08809688-9620422554752 x M101 x M10733
SDSSC-09610396-10321723954752 x M101 x M10755
SDSSC-103111103-11123625454752 x M101 x M10853
SDSSC-111119111-11925026954752 x M101 x M10884
SDSSC-119128119-12826728554752 x M101 x M10915

Technical Illustration