Product Finder

Our Product Finder tool allows you to find the perfect product for your requirements.

оронавирус COVID–19: Информация для клиентов касательно коронавируса COVID-19

757 | Hexagon Head Stopper PlugAvailable brass, nickel plated brass, aluminium, stainless steel & nylon

Hexagon Head Stopper Plug, Globally Approved, Explosive Atmosphere Cable / Conduit Accessory

• Provides means of blanking unused cable entries
• Temporary or permanent
• General purpose / industrial version available
• Equipment interface ‘O’ ring seal available
• Nylon Ex e only version available (-20˚C to +60˚C)
•-60˚C to 200˚C (metallic versions)
• Globally marked, IECEx, ATEX, cCSAus & UL

DescriptionAllen key recessMetallicNon-Metallic
Ex "d"Ex "e"IndustrialEx "e"Industrial
747 Recessed Non-Tamper Proof Type 'A'
747 Recessed Tamper Proof Type 'B'
757 Hexagon Head
757 Hexagon Head c/w 'O' ring seal
767 Dome Head
767 Dome Head c/w 'O' ring seal
BS 6121:Part 1:1989, IEC 62444, EN 62444
IK10 to IEC 62262 (20 joules) Brass & Stainless Steel Only
II 2G Ex d IIC Gb, Ex e IIC Gb, II 1D Ex ta IIIC Da
IM2 Ex d I Mb, Ex e I Mb
(II 2G Ex e IIC Gb, II 1D Ex ta IIIC Da only on Nylon version)
EN 60079-0,1,7, 31
IECEx CML 18.0177X
Ex d I Mb, Ex e I Mb; Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da
IEC 60079-0,1, 7, 31
Ex e II, Class I, Zone 1, AEx e II; IP66, 67, 68; Enclosure Type 4X; Class II Groups E, F and G; Class III
C22.2 No. 0, 0.5, 30,94,CAN/CSA E60079-0, 1, 7, UL50 Edition 11, UL1203 Edition 4,
UL 60079-0, 1, 7
Class I, Groups A,B,C,D; Class II Groups E,F,G; Class III
UL 1203
TC RU C-GB.ГБ05.B00138
TÜV 12.1333X
LRS: 01/00173 (E1), DNV: E-13848, ABS: 01-LD234401C/2-PDA
-60°C to +200°C (Metallic), -20°C to +60°C (Nylon)
IP66 or IP68 when fitted with a CMP ‘O’ ring or Entry Thread Seal**
Brass, Electroless Nickel Plated Brass, Aluminium, Stainless Steel, Nylon

** Refer to Maintaining a Seal for further information on Ingress Protection Ratings

Product Selection Table

Click here to view Technical Illustration

Technical Illustration

Click here to view how to order

Ordering ReferenceThread SizeMinimum Thread LengthAcross Flats "A"Across Corners DiameterProtrusion Length "C"
757DM1M16 X 1.50.5910.8660.9530.197
757DM2M20 X 1.50.5910.9451.0390.197
757DM3M25 X 1.50.5911.1811.2990.197
757DM4M32 X 1.50.5911.4171.5590.197
757DM5M40 X 1.50.5911.8111.9920.197
757DM6M50 X 1.50.5912.1652.3820.197
757DM7M63 X 1.50.5912.7563.0310.197
757DM8M75 X 1.50.5913.1503.4650.197
757DM9M90 X 2.00.9453.8984.2870.197
757DM10M100 x 2.00.9454.2524.6770.197
Dimensions are displayed in inches unless otherwise stated
Ordering ReferenceThread SizeMinimum Thread LengthAcross Flats "A"Across Corners DiameterProtrusion Length "C"
757DM1M16 X 1.515.
757DM2M20 X 1.515.
757DM3M25 X 1.515.
757DM4M32 X 1.515.
757DM5M40 X 1.515.
757DM6M50 X 1.515.
757DM7M63 X 1.515.
757DM8M75 X 1.515.
757DM9M90 X
757DM10M100 x 2.024.0108.0118.85.0
Dimensions are displayed in millimetres unless otherwise stated