Наш инструмент расширенного поиска позволяет найти продукцию, в точности соответствующую вашим требованиям.
оронавирус COVID–19: Информация для клиентов касательно коронавируса COVID-19
оронавирус COVID–19: Информация для клиентов касательно коронавируса COVID-19
Globally Approved, Explosive Atmosphere Barrier Cable Gland
• Metal-to-metal armour clamping
• Direct & remote installation
• Compound barrier type flameproof seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• Integral protected deluge seal
• -60˚C to +85˚C
• Class I Zone 1, 21 and Zone 2, 22 Class I Division 1 & 2 ABCD
• Globally marked, IECEx, ATEX, UL & cCSAus
• EMC tested
† Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).
Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a single layer of armour such as SWA the clamping range should be used as shown in the table below.
| BS 6121:Part 1:1989, IEC 62444, EN 62444 | |
| Impact = Level 8, Retention = Class B | |
| IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only | |
| Category B (Category A when used with braid, tape or pliable wire armour cables) | |
| CML 18ATEX1325X, CML 18ATEX4317X | |
| II 2G, II 1D, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da, II 3G Ex nR IIC Gc, IM2 Ex d I Mb, Ex e I Mb |
|
| EN 60079-0,1,7,15,31 | |
| IECEx CML 18.0182X, IECEx SIM 14.0008X | |
| Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I Mb, Ex e I Mb | |
| IEC 60079-0,1,7,15,31 | |
| 2288626 | |
| Class I, Div. 1, 2 Groups A, B, C and D; Class II, Div. 1, 2 Groups E, F and G; Class III, Div. 1, 2; Type 4X: Oil Resistant II: Class I, Zone 1 AEx d IIC Gb, AEx e IIC Gb, Class I, Zone 2 AEx nR IIC Gc, Class I, Zone 20 AEx ta IIIC Da |
|
| Class I, Div. 1, 2 Groups A, B, C and D; Class II, Div. 1, 2 Groups E, F and G; Class III, Div. 1, 2; Type 4X: Oil Resistant II: Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da |
|
| Class I, Div 1,2, Groups A,B,C,D; Class II, Div 1,2, Groups E,F,G, Class III, Div 1,2; Class I Zone 1, AEx d IIC, AEx nR II, NEMA 4X , Oil Resistant II AEx d IIC Gb, AEx e IIC Gb, Class I, Zone 2 AEx nR IIC Gc, Class I, Zone 20 AEx ta IIIC Da |
|
| CAN/CSA-C22.2 No 0,18,25,30,94,174, CAN/CSA-E60079-0,1,7,15,31 CAN/CSA-E61241-1-1 Part 1-1, ANSI/UL 514B Ed 5, ANSI/UL 50 Ed 11, ANSI/UL 2225 Ed 4, UL60079 |
|
| E201187, E161256C | |
| Class I Div 1,2, Groups A,B,C,D, Class II Div 1,2, Groups E,F,G | |
| UL 2225, CSA C22.2 No 174, UK 514B, CSA C22.2 No 18, CSA C22.2 No 30 | |
| TC RU C-GB.ГБ05.B00138 | |
| UA.TR.047.C.0644-15 | |
| 14-GA4BO-0252X | |
| P444949 | |
| GYJ13.1140X, GYJ13.1282X | |
| TÜV 12.2073X | |
| 03866 | |
| LRS: 01/00172 (E3), DNV: E-13848, ABS: 14-LD234401A-4-PDA | |
| IP66, IP67 & IP68 | |
| DTS01 : 91 | |
| Electroless Nickel Plated Brass, Brass, Stainless Steel, Aluminium | |
| CMP SOLO LSF Halogen Free Thermoset Elastomer / Epoxy Barrier Compound | |
| Screened Flexible (EMC) Wire Braid (e.g. CY / SY), Pliable Wire Armour (PWA), Steel Tape Armour (STA), Wire Braid Armour (e.g. SWB), Aluminium Strip Armour (ASA), Armoured & Jacketed*** |
|
| Detachable Compound Tube / Cone & AnyWay Universal Clamping Ring | |
| Unique CMP ‘LRS’ Outer Seal (Load Retention Seal) | |
| Inner Compound Barrier & Outer Sheath |
Note : * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** Refer to Maintaining a Seal for further information on Ingress Protection Ratings
***Where the cable is permitted by code (NEC and/or CEC)
Нажмите здесь чтобы ознакомиться с технической иллюстрацией
Нажмите здесь чтобы просмотреть информацию о заказе
