Наш инструмент расширенного поиска позволяет найти продукцию, в точности соответствующую вашим требованиям.
оронавирус COVID–19: Информация для клиентов касательно коронавируса COVID-19
оронавирус COVID–19: Информация для клиентов касательно коронавируса COVID-19
CMP slip-on Earth Tags, installed between the Cable Gland and equipment, provide an earth bond connection as specified in BS6121:Part 5:1993 and comply with category B rating specified in IEC 62444. CMP Earth Tags have been independently short circuit tested to verify their suitability under specified service conditions. A copy of the test report is available upon request and is an important factor when selecting earth tags from any manufacturer, as without this the safety of installations may be compromised.
Stainless steel, aluminium and nickel plated brass earth tags are also available. Please refer to ordering reference numbers, e.g. 20ET4 for M20 Stainless Steel Earth Tag, 050NPTET4 for 1/2” NPT Stainless Steel Earth Tag.
** Refer to Maintaining a Seal for further information on Ingress Protection Ratings
Нажмите здесь чтобы просмотреть информацию о заказе
| Metric Ordering Reference (Brass) | Reference Diameter "A" | Minimum Thickness | Nominal Diameter "C" | Hole Size "D" | Nominal Length "E" | Nominal Centres "F" | NPT Ordering Reference (Brass) | Reference Diameter "A" | Minimum Thickness | Nominal Diameter "C" | Hole Size "D" | Nominal Length "E" | Nominal Centres "F" |
| 16ET | M16 | 0.051 | 1.000 | M6 | 1.984 | 1.189 | 050NPTET | 1/2 NPT | 0.051 | 1.067 | M6 | 2.083 | 1.303 |
| 20ET | M20 | 0.051 | 1.067 | M6 | 2.059 | 1.303 | 075NPTET | 3/4 NPT | 0.059 | 1.382 | M6 | 2.331 | 1.402 |
| 25ET | M25 | 0.059 | 1.382 | M6 | 2.331 | 1.402 | 100NPTET | 1 NPT | 0.059 | 1.780 | M12 | 3.031 | 1.697 |
| 32ET | M32 | 0.059 | 1.780 | M12 | 3.031 | 1.697 | 125NPTET | T 1 1/4 NPT | 0.059 | 2.114 | M13 | 3.492 | 1.787 |
| 40ET | M40 | 0.059 | 2.114 | M13 | 3.492 | 1.787 | 150NPTET | 1 1/2 NPT | 0.059 | 2.567 | M13 | 4.378 | 2.287 |
| 50ET | M50 | 0.059 | 2.567 | M13 | 4.378 | 2.287 | 200NPTET | 2 NPT | 0.059 | 3.252 | M13 | 5.067 | 2.630 |
| 63ET | M63 | 0.059 | 3.252 | M13 | 5.067 | 2.630 | 250NPTET | 2 1/2 NPT | 0.059 | 3.756 | M13 | 5.571 | 2.874 |
| 75ET | M75 | 0.059 | 3.756 | M13 | 5.571 | 2.874 | 300NPTET | 3 NPT | 0.079 | 4.488 | M13 | 6.339 | 3.346 |
| 90ET | M90 | 0.079 | 4.496 | M13 | 6.339 | 3.346 | 350NPTET | 3 1/2 NPT | 0.079 | 4.921 | M13 | 7.669 | 4.055 |
| 100ET | M100 | 0.079 | 4.921 | M13 | 7.669 | 4.646 | - | - | - | - | - | - | - |
| All dimensions shown in inches unless otherwise stated | |||||||||||||
| Metric Ordering Reference (Brass) | Reference Diameter "A" | Minimum Thickness | Nominal Diameter "C" | Hole Size "D" | Nominal Length "E" | Nominal Centres "F" | NPT Ordering Reference (Brass) | Reference Diameter "A" | Minimum Thickness | Nominal Diameter "C" | Hole Size "D" | Nominal Length "E" | Nominal Centres "F" |
| 16ET | M16 | 1.3 | 25.4 | M6 | 50.4 | 30.2 | 050NPTET | 1/2 NPT | 1.3 | 27.1 | M6 | 52.9 | 33.1 |
| 20ET | M20 | 1.3 | 27.1 | M6 | 52.3 | 33.1 | 075NPTET | 3/4 NPT | 1.5 | 35.1 | M6 | 59.2 | 35.6 |
| 25ET | M25 | 1.5 | 35.1 | M6 | 59.2 | 35.6 | 100NPTET | 1 NPT | 1.5 | 45.2 | M12 | 77.0 | 43.1 |
| 32ET | M32 | 1.5 | 45.2 | M12 | 77.0 | 43.1 | 125NPTET | 1 1/4 NPT | 1.5 | 53.7 | M13 | 88.7 | 45.4 |
| 40ET | M40 | 1.5 | 53.7 | M13 | 88.7 | 45.4 | 150NPTET | 1 1/2 NPT | 1.5 | 65.2 | M13 | 111.2 | 58.1 |
| 50ET | M50 | 1.5 | 65.2 | M13 | 111.2 | 58.1 | 200NPTET | 2 NPT | 1.5 | 82.6 | M13 | 128.7 | 66.8 |
| 63ET | M63 | 1.5 | 82.6 | M13 | 128.7 | 66.8 | 250NPTET | 2 1/2 NPT | 1.5 | 95.4 | M13 | 141.5 | 73.0 |
| 75ET | M75 | 1.5 | 95.4 | M13 | 141.5 | 73.0 | 300NPTET | 3 NPT | 2.0 | 114.0 | M13 | 161.0 | 85.0 |
| 90ET | M90 | 2.0 | 114.2 | M13 | 161.0 | 85.0 | 350NPTET | 3 1/2 NPT | 2.0 | 125.0 | M13 | 194.8 | 103.0 |
| 100ET | M100 | 2.0 | 125.0 | M13 | 194.8 | 118.0 | - | - | - | - | - | - | - |
| All dimensions shown in millimetres unless otherwise stated | |||||||||||||
