PatriotSDSS cable cleat

CMP Patriot cable cleats are metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ IEC 61914:2009 to ensure the securing and retention of cables, without sustaining damage to the cable(s).

The cable cleat has been designed and tested for short circuit conditions, within harsh environments. The Patriot cable cleats are available for trefoil application/formation for diameters of 19mm to 128mm in 23 sizes. The Patriot cable cleat is fabricated from 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest of environments.

The Patriot cable cleat has three M10 fixing clearance holes within one base allowing versatility to the installer during installation, and is designed to enable the product to be secured to a variety of mounting surfaces. The Patriot cable cleats hinge opens fully allowing the cables to be easily placed within the cable cleat to aid the installer before closing and securing via the mouth piece bolt.

The Patriot cable cleats come with Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free liners as standard, helping to restrain the cable(s) within vertical applications, providing a layer of protection between the cable sheath and the cable cleat during normal operation, where thermal elongation of cables occur, protecting the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free liners also assist in the extra protection of cable(s) in the event of short circuit fault conditions. The standard liners supplied are classifed as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free.

• Third party certification to IEC 61914:2009
• 316L stainless steel
• 19 – 128mm in 23 sizes for trefoil formation / application
• Short circuit rating of 135kA peak fault
• Operating temperature -50°C to +60°C
• Standard liners which are Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free liners as standard
• Combined single (M10) or two bolt (M10) fixing design

Выданные патенты: SG 11201506573Q, US 9551438

[table id=359 /]

[table id=360 /]