SHVSS-WM Single high voltage wall mounted cleat

CMP SHVSS-WM wall mounted single cable cleat is a composite cable cleat which has been designed and constructed in accordance with International Standard IEC 61914: Cable cleats for electrical installations, to ensure the securing and retention of cables, without sustaining damage to the cable(s).

The stainless steel section of this cable cleat can be optionally coated with an extremely high performance UL94 V0 flame retardant, halogen free, low smoke and fume, low toxicity polymer alloy coating. The coating makes the cleat resistant to impact, abrasion, salt spray, chemical attack, weathering and UV, and is perfectly suited for use in rail and tunnel applications.

The SHVSS-WM cable cleat is an extension of CMP’s SHVSS (Single High Voltage Stainless Steel) Cable Cleat system. The system is designed to suit installations of high voltage cables in a vertical parallel formation, where the cable cleat will be mounted against a wall or a vertical support structure. The design incorporates a hinged side and a fixing side allowing for easier installations.

The robust base design of the cleat enables the cable to be installed within the cable cleat before the top part of the cleat is clamped down onto the cable. The fixing bolts can be captive within the assembly with an option of a single closing bolt if required.

This cable cleat is fabricated in non-magnetic 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest environments.

Low Smoke and Fume, Zero Halogen (LSFOH) fixed liners are standard, restraining the cables within vertical applications whilst providing a layer of protection for the cable sheath and the cable cleat during normal operation where thermal elongation of cable occurs. This also protects the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications.

The LSFOH liners also assist in the extra protection of cables in the event of short circuit fault conditions.

FEATURES

  • 316L stainless steel with polymer liner
  • Operating temperature -50°C to +60°C or -58°F to +140°F
  • Low Smoke and Fume Zero Halogen (LSF0H), Phosphorus-free liners

 

Type SHVSS-WM - Single High Voltage Wall Mounted Cleat
Design Specification IEC 61914:2015
Temperature for permanent application -50°C to +60°C
Needle Flame Test Pass - 120 second flame application time
Lateral Load Test Refer to CMP Products, IEC 61914 clause 9.3
Impact Resistance Pass - Very Heavy
Material 316L Stainless Steel with optional Low Smoke and Fume
Zero Halogen (LSF0H), Phosphorus-free
Jump to technical illustration    Fixing Pack Information

Product Selection Table

PART NO.CABLE Ø
(in)
DIMENSIONS (in)WEIGHT (oz)
MIN ØMAX ØWHDPFIXING HOLE Ø
SHVSS-WM-1201304.7245.1187.8747.0876.9696.1425.31568.255
SHVSS-WM-1301405.1185.5128.2687.0877.1656.1425.31570.407
SHVSS-WM-1401505.5125.9068.6617.4807.7566.1425.70974.604
SHVSS-WM-1501605.9066.2999.0557.4807.9536.1425.70976.686
SHVSS-WM-1601706.2996.6939.4497.8748.5436.1426.10280.989
SHVSS-WM-1701806.6937.0879.8437.8748.746.1426.10283.070
Dimensions are displayed in inches unless otherwise stated
PART NO.CABLE Ø
(mm)
DIMENSIONS (mm)WEIGHT (g)
MIN ØMAX ØWHDPFIXING HOLE Ø
SHVSS-WM-1201301201302001801771561351935
SHVSS-WM-1301401301402101801821561351996
SHVSS-WM-1401501401502201901971561452115
SHVSS-WM-1501601501602301902021561452174
SHVSS-WM-1601701601702402002171561552296
SHVSS-WM-1701801701802502002221561552355
Dimensions are displayed in millimeters unless otherwise stated

Technical Illustration

Additional Information

Cable Specifications & Industry Standards

Both national and international types of projects develop detailed cable specifications to suit specific project requirements. These cable specifications often follow several aspects of the prevailing industry standards, however cable standards are often under ongoing development. Cable standards and industry requirements usually remain in step with each other.

Read more

Visit our Knowledge Base for technical expertise and advice, gathered over CMP's 60+ years' experience in the art of terminating cable glands.

Sign up now