Olympus (SHVSS) Single High Voltage Cable Cleat

CMP OLYMPUS single cable cleat is a composite cable cleat which has been designed, constructed and tested in accordance with the International Standard ‘cable cleats for electrical installations’ IEC 61914:2015 to ensure the securing and retention of cables, without sustaining damage.

The stainless steel section of this cable cleat can be optionally coated with an extremely high performance UL94 V0 flame retardant. This low toxicity polymer alloy coating is halogen free polymer and low smoke & fume, whilst being resistant to: impact, abrasion, salt spray, chemical attack, weathering & UV, making it perfectly suited for use in rail applications.

OLYMPUS cable cleats are designed to be installed as a system for use with High Voltage cable installations and can be manufactured in a standard set of cable diameter range or to suit specific project parameters.

Fabricated in non-magnetic 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest environments.

Flame retardant low smoke and fume, zero halogen(FR LSF/LSOH) polymeric fixed liners are fitted as standard, helping to:

  • Restrain the cables within vertical applications.
  • Provide a layer of protection to both the cable sheath and
    the cable cleat, during normal operation where thermal
    elongation of cable occurs.
  • Protect the cable from chafing on any mounting surface
    due to differential movements, such as those found in
    marine and offshore applications.
  • Assist in the extra protection of cables in the event of
    short circuit fault conditions

Features

  • Third party tested in accordance with IEC 61914:2015
  • Available in 316L stainless steel
  • Sunlight (UV) resistant
  • Operating temperature -60°C to +90°C
  • Excellent axial and lateral load retention
SHORT CIRCUIT TESTING TO IEC 91614 - CLAUSE 9.5
PARALLEL FORMATION
TWO SHORT CIRCUIT 2.4mTWO SHORT CIRCUIT 1.5m
290mm conductor centres
290mm conductor centres
1 sec1 sec
176kA Peak160kA Peak
63 kA r.m.s64 kA r.m.s
Type 6.1.3 Composite
Design Specification IEC 61914
Temperature for permanent application -60°C to +90°C
IEC61914 clause / part 6.2
Needle Flame Test Pass - 120 seconds
IEC 61914 clause
10.0, 10.1, IEC 60695-11-5
Material 316L Stainless Steel
Liner Material FR LSF / LSOH Polymer
Cable Formation Parallel
Lateral Load Test 33 kN
Axial Load Test 4.5 kN
Jump to technical illustration    Fixing Pack Information

Product Selection Table

Olympus Part No.CABLE Ø RANGE
TAKE (in.)
Dimensions (in.)Weight (oz)
WHDP*Fixing Hole ø
SHVSS090100 3.54-3.93
6.705
5.327
7.09
3.937
2 X M1677.603
SHVSS1001103.93-4.33
7.248
5.917
7.09
3.937
2 X M1684.658
SHVSS1101204.33-4.72
7.594
6.118
7.09
3.937
2 X M1689.949
SHVSS1201304.72-5.12
8.028
6.512
7.09
3.937
2 X M1693.476
SHVSS1301405.12-5.51
8.484
6.870
7.09
3.937
2 X M16100.531
SHVSS1401505.51-5.90
8.846
7.264
7.09
3.937
2 X M16104.058
SHVSS1501605.90-6.30
9.217
7.657
7.09
3.937
2 X M16107.586
SHVSS1601706.30-6.69
9.583
8.055
7.09
3.937
2 X M16111.113
SHVSS1701806.69-7.08
10.004
8.449
7.09
3.937
2 X M16118.168
SHVSS1801907.08-7.48
10.445
8.843
7.09
3.937
2 X M16123.459
SHVSS1902007.47-7.87
10.815
9.236
7.09
3.937
2 X M16126.986
Olympus Part No.CABLE Ø RANGE
TAKE (MM)
Dimensions (mm)Weight (g)
WHDP*Fixing Hole ø
SHVSS090100 90-100170.3135.31801002 X M162200
SHVSS100110100-110184.1150.31801002 X M162400
SHVSS110120110-120192.9155.41801002 X M162550
SHVSS120130120-130203.9165.41801002 X M162650
SHVSS130140130-140215.5174.51801402 X M162850
SHVSS140150140-150224.7184.51801402 X M162950
SHVSS150160150-160234.1194.51801402 X M163050
SHVSS160170160-170243.4204.61801402 X M163150
SHVSS170180170-180254.1214.61801802 X M163350
SHVSS180190180-190265.3224.61801802 X M163500
SHVSS190200190-200274.7234.61801802 X M163600

Technical Illustration