Skip to Menu: Selection Table | Technical Data | Additional information

TMCX Cable Connector  

Electroless Nickel Plated Brass

Click thumbnails for alternate materials

TMCX Hazardous Location Cable Connector 

CMP Type TMCX Cable Connector suitable for use with Corrugated Interlocked & Continuously Welded Metal Clad (Type MC or MC-HL) or TECK armored and armored & jacketed cables in ordinary, wet & hazardous locations including Class I Division 1 & 2 installations. 

All CMP Cable Connectors are EMC Tested.

Click for more details

The cable connector provides a Compound Barrier Seal around the conductors, mechanical retention and electrical continuity via the armor termination and an environmental seal on the cable outer jacket.

In addition this cable connector also offers Class I Zone 1 and Ex d IIC (CSA) certification. The reusable compression spring feature providing both grounding and gripping functions to the cable armor, allows the cable to be easily disconnected from the equipment, for maintenance and change out etc.

The TMCX cable connector offers Nema 4X and IP66 ingress protection and is supplied in Copper Free Aluminum, Stainless Steel, or Electroless Nickel Plated Brass. The TMCX is available in NPT (standard) and Metric thread forms, and is ATEX and IEC Ex Certified Ex d IIC & Ex e II, offering a single solution that can be employed in accordance with both NEC and IEC codes of installation. 

Features and Benefits:

Certified to CSA, ATEX (EN) & IECEx Standards
CMP renowned displacement seal provides NEMA 4X and IP66 levels of ingress protection.
Additional integral Deluge Proof seal for extra protection in extremely harsh offshore and onshore environments.
Independent sealing and armor clamping
True 360° grounding
Superior pull out prevention
Compact slim profile
Reduced installation time
Widest cable acceptance range
Supplied complete with epoxy sealing compound
Disconnectable design
Metric option available

Cable Gland Selection Table

View Metric Table
View Imperial Table

Ordering Reference (NPT)			Entry Thread "C"		Minimum Thread Length (Metric) "E"	Actual Thread Length (NPT) "E"	Cable Armor Diameter "A"				Cable Jacket Diameter "B"		Nominal Assembly Length "F"	Envelope Diameter "D"		Compound Weight (Kgs)	Shroud Reference*
Aluminum	Nickel Plated Brass	Stainless Steel	NPT	Metric			End Stop In		End Stop Out		Min	Max		Across Flats	Across Corners
Aluminum	Nickel Plated Brass	Stainless Steel	NPT	Metric			Min	Max	Min	Max	Min	Max		Across Flats	Across Corners
TMCX050SA	TMCX050SNB	TMCX050SSS	1/2"	M20	15.0	20.2	-	-	8.6	12.7	8.9	14.0	55.9	30.0	33.3	0.150	PVC06
TMCX050A	TMCX050NB	TMCX050SS	1/2"	M20	15.0	20.2	-	-	11.2	17.0	14.0	20.1	55.9	36.1	39.9	0.150	PVC09
TMCX075A	TMCX075NB	TMCX075SS	3/4"	M25	15.0	20.5	15.0	19.3	19.3	23.4	17.0	26.4	55.9	40.9	45.5	0.150	PVC11
TMCX100A	TMCX100NB	TMCX100SS	1"	M32	15.0	25.3	19.8	24.6	24.6	29.2	23.1	32.3	56.9	49.8	55.4	0.380	PVC13
TMCX125A	TMCX125NB	TMCX125SS	1 1/4"	M40	15.0	25.9	27.4	31.2	31.2	35.3	29.5	38.1	56.9	54.9	61.0	0.380	PVC15
TMCX150A	TMCX150NB	TMCX150SS	1 1/2"	M50	15.0	26.4	33.5	37.1	37.1	41.1	35.6	44.2	60.2	59.9	66.5	0.600	PVC18
TMCX200SA	TMCX200SNB	TMCX200SSS	2"	M50	15.0	27.2	38.4	42.7	42.7	47.0	40.1	51.1	66.0	70.6	77.7	1.440	PVC21
TMCX200A	TMCX200NB	TMCX200SS	2"	M63	15.0	27.2	45.0	49.0	49.0	53.1	47.2	56.1	71.4	75.2	83.3	1.440	PVC23
TMCX250SA	TMCX250SNB	TMCX250SSS	2 1/2"	M75	15.0	40.2	52.1	54.9	54.9	58.9	52.8	62.0	73.2	79.8	88.6	2.850	PVC28
TMCX250A	TMCX250NB	TMCX250SS	2 1/2"	M75	15.0	40.2	57.2	61.2	61.2	64.8	59.2	68.1	73.2	85.1	94.2	2.850	PVC28
TMCX300A	TMCX300NB	TMCX300SS	3"	M90	24.0	41.8	64.5	70.6	70.6	75.4	66.5	79.5	99.6	110.0	121.9	3.750	PVC31
TMCX350A	TMCX350NB	TMCX350SS	3 1/2"	M100	24.0	43.1	73.9	83.6	83.6	88.6	75.9	97.3	117.1	133.4	147.8	5.700	-
TMCX400A	TMCX400NB	TMCX400SS	4"	M115	24.0	44.3	-	-	88.9	102.1	94.0	107.2	194.6	133.4	148.3	5.700	-
Dimensions are displayed in millimeters unless otherwise stated

Order Code Example: TMCX-250-SS-272 - "TMCX" (Gland Type) - "250" (2-1/2" NPT Thread) - "SS" (Material Stainless Steel) - "272" (Max Cable Diameter 2.72")

TECHNICAL DATA

CSA Approval Certificate No.	CSA.1129339
CSA Code of Protection Category	Class I Div 2 Groups ABCD, Class II Div 1 & 2 EFG, Class III, Class 1 Zone 1 & 2 AEx d IIC / Ex d IIC, AEx e II / Ex e II / Ex d IIC / Ex e II, Ordinary & Wet Locations
CSA Compliance Standards	CAN/CSA-C22.2 No. 18-92, CSA Std C22.2 No. 25-1966, CSA Std C22.2 No. 174-M1984, CAN/CSA-C22.2 No. 94-M91, CAN/CSA-E60079-0-2001, IEC 60079-0:1998, IEC 60079-1-2004

GOST R Certificate Number	POCC GB.HO06.B00207
GOST R Code of Protection Category	Ex d IIC X / Ex e II X / DIP A21
GOST R Compliance Standards	ГOCT P 52350.0-2005, ГOCT P 52350.1-2005, ГOCT P 52350.7-2005, ГOCT MЭK 61241-1-1-99
GOST GGTN Permit	PPC 00-40706

GOST K Certificate Number	KZ 75000361 01 01 14761
RoK Permit For Use Number	19-02-UL-1957

Lloyds Approval No.	01/00172
DNV Approval No.	E-10496
ABS Approval No.	01-LD234401A/2-PDA

RETIE Approval Number

03866

Type	TMCX
Design Specification	BS 6121:Part 1:1999, UL 514B, UL 2225, CSA 22.2
ATEX Certification Detail	SIRA07ATEX1122X
ATEX Code of Protection Category	ATEX II 2 GD, Ex d IIC, Ex e IIC; ATEX Ex tD A21 IP66
ATEX Compliance Standards	EN 60079-0, EN 60079-1, EN 60079-7, EN IEC 61241-0, EN IEC 61241-1
IEC Ex Certification Detail	IECEx SIR 07.0083X
IEC Ex Code of Protection Category	Ex d IIC / Ex e II / Ex tD A21 IP66
IEC Ex Compliance Standards	IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0, IEC 61241-1
Continuous Operating Temperature	-60°C to +85°C
Ingress Protection Rating	Nema 4X and IP66
Cable Type	Corrugated & Interlocked Metal Clad Armor (MC) or TECK, Continuously Welded Metal Clad Armor (MCHL)
Armor Clamping	360° Stainless Steel Grounding Spring
Jacket Sealing Technique	CMP Unique Displacement Seal Concept
Sealing Area(s)	Inner Compound Barrier and Cable Outer Jacket
Material Safety Data Sheet	Hardener / Resin
Cable Connector Material	Copper Free (<0.4%) Aluminum, Stainless Steel, or Electroless Nickel Plated Brass
Optional Accessories	Adaptor/Reducer, Earth Tag