TMC Ordinary, Wet & Hazardous Location Cable Connector
CMP Type TMC Cable Connector suitable for use with Corrugated Interlocked & Continuously Welded Metal Clad (Type MC or MC-HL) or TECK armored and armored & jacketed cables in ordinary, wet & hazardous locations including Class II Division 1 & 2 installations.
All CMP Cable Connectors are EMC Tested.
The cable connector provides mechanical retention and electrical continuity via the armor termination and an environmental seal on the cable outer jacket. In addition this UL listed cable connector also offers Class I Zone 1, AEx e II certification. The re-usable compression spring feature providing both grounding and gripping functions to the cable armor, allows the cable to be easily disconnected from the equipment, for maintenance and change out etc.
The TMC cable connector offers Nema 4X and IP66 ingress protection and is supplied in Copper free Aluminum, Stainless Steel, or Electroless Nickel Plated Brass. The TMC is available in NPT (standard) and Metric thread forms, and is ATEX and IEC Ex Certified Ex e II, offering a single solution that can be employed in accordance with both NEC and IEC codes of installation.
Features and Benefits:
- Certified to CSA, ATEX (EN) & IECEx Standards
- CMP renowned displacement seal provides NEMA 4X and IP66 levels of ingress protection.
- Additional integral Deluge Proof seal for extra protection in extremely harsh offshore and onshore environments.
- Integral equipment interface "O" ring seal as standard**
- Independent sealing and armor clamping
- True 360° grounding
- Superior pull out prevention
- Compact slim profile
- Reduced installation time - (no disassembly required)
- Widest cable acceptance range
- Re-usable design
- Only 13 connector sizes required
- Metric option available
Cable Gland Selection Table
- View Metric Table
- View Imperial Table
| Order Reference (NPT) | Entry Thread "C" | Minimum Thread Length "E" | Cable Armor Diameter "A" | Cable Jacket Diameter "B" | Nominal Assembly Length "F" | Envelope Diameter "D" | Shroud Reference* | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Aluminum | Nickel Plated Brass | Stainless Steel | NPT | End Stop In | End Stop Out | Min | Max | Across Flats | Across Corners | |||||
| Min | Max | Min | Max | |||||||||||
| TMC050SA | TMC050SNB | TMC050SSS | 1/2" | 15.0 | - | - | 8.7 | 12.8 | 9.0 | 14.0 | 55.9 | 30.0 | 33.3 | PVC06 |
| TMC050A | TMC050NB | TMC050SS | 1/2" | 15.0 | 9.1 | 13.0 | 13.0 | 17.0 | 13.0 | 20.0 | 55.9 | 36.1 | 39.9 | PVC09 |
| TMC075A | TMC075NB | TMC075SS | 3/4" | 15.0 | 15.0 | 19.2 | 19.2 | 23.3 | 17.0 | 26.3 | 55.9 | 40.9 | 45.5 | PVC10 |
| TMC100A | TMC100NB | TMC100SS | 1" | 16.0 | 19.7 | 24.6 | 24.6 | 29.2 | 23.1 | 32.2 | 56.9 | 49.8 | 55.4 | PVC13 |
| TMC125A | TMC125NB | TMC125SS | 1 1/4" | 16.0 | 27.5 | 31.2 | 31.2 | 35.2 | 29.5 | 38.2 | 56.9 | 54.9 | 61.0 | PVC16 |
| TMC150A | TMC150NB | TMC150SS | 1 1/2" | 16.0 | 33.5 | 37.1 | 37.1 | 41.1 | 35.6 | 44.1 | 60.2 | 59.9 | 66.5 | PVC18 |
| TMC200SA | TMC200SNB | TMC200SSS | 2" | 16.0 | 38.3 | 42.6 | 42.6 | 47.1 | 40.1 | 51.0 | 65.5 | 70.6 | 77.7 | PVC21 |
| TMC200A | TMC200NB | TMC200SS | 2" | 16.0 | 45.0 | 49.1 | 49.1 | 53.0 | 47.2 | 56.0 | 63.2 | 75.2 | 83.3 | PVC24 |
| TMC250SA | TMC250SNB | TMC250SSS | 2 1/2" | 22.9 | 52.1 | 54.9 | 54.9 | 58.9 | 52.8 | 62.0 | 63.5 | 79.8 | 88.6 | PVC25 |
| TMC250A | TMC250NB | TMC250SS | 2 1/2" | 22.9 | 57.1 | 61.1 | 61.1 | 64.6 | 59.1 | 68.0 | 64.0 | 85.1 | 94.2 | PVC27 |
| TMC300A | TMC300NB | TMC300SS | 3" | 24.9 | 64.6 | 70.5 | 70.5 | 75.3 | 66.6 | 79.4 | 90.7 | 110.0 | 121.9 | PVC32 |
| TMC350A | TMC350NB | TMC350SS | 3-1/2" | 36.5 | 74.0 | 83.6 | 83.6 | 88.5 | 76.0 | 97.3 | 117.1 | 133.4 | 147.8 | - |
| TMC400A | TMC400NB | TMC400SS | 4" | 36.5 | - | - | 88.9 | 102.1 | 94.0 | 107.2 | 194.6 | 134.1 | 148.3 | - |
| Dimensions are displayed in millimeters unless otherwise stated | ||||||||||||||
*CMP SOLO LSF Halogen Free Shrouds also available on request.
*CMP SOLO LSF Halogen Free Shrouds also available on request.
| TECHNICAL DATA | |||||||
|
|
|||||||
| CSA Approval Certificate No. | 1129339 |
| CSA Code of Protection Category | Class II Div 1 & 2 Groups EFG, Class III Div 1 & 2, Class I Zone 1 Ex e II, Enclosure Type 3, 4 and 4X |
| CSA Compliance Standards | CAN/CSA-C22.2 No. 18-92, CSA Std C22.2 No. 25-1966, CSA Std C22.2 No. 174-M1984, CAN/CSA-C22.2 No. 94-M91, CAN/CSA-E60079-0-2001, IEC 60079-0:1998, IEC 60079-1-2004 |
| GOST R Certificate Number | POCC GB.HO06.B00207 |
| GOST R Code of Protection Category | Ex d IIC X / Ex e II X / DIP A21 |
| GOST R Compliance Standards | ГOCT P 52350.0-2005, ГOCT P 52350.1-2005, ГOCT P 52350.7-2005, ГOCT MЭK 61241-1-1-99 |
| GOST GGTN Permit | PPC 00-40706 |
| GOST K Certificate Number | KZ 75000361 01 01 14761 |
| Lloyds Approval No. | 01/00172 |
| DNV Approval No. | E-10496 |
| ABS Approval No. | 01-LD234401A/2-PDA |
| RETIE Approval Number | 03866 |
| Type | TMC |
| Design Specification | UL 514B, UL 886, IEC 60079-0, IEC 60079-7 |
| ATEX Certification Detail | SIRA07ATEX1122X |
| ATEX Code of Protection Category | ATEX  Ex II 2 GD, Ex e II, Ex tD A21 IP66 |
| ATEX Compliance Standards | EN 60079-0, EN 60079, EN 60079-7, EN IEC 61241-0, EN IEC 61241-1 |
| IEC Ex Certification Detail | IECEx SIR 07.0083X |
| IEC Ex Code of Protection Category | Ex e II, Ex tD A21 IP66 |
| IEC Ex Compliance Standards | IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0, IEC 61241-1 |
| Continuous Operating Temperature | -60°C to +130°C |
| Ingress Protection Rating | IP66 |
| Nema Rating | NEMA 4X |
| Cable Connector Material | Copper Free Aluminum (<0.4%), Electroless Nickel Plated Brass, Stainless Steel |
| Seal Material | CMP SOLO LSF Thermoplastic Elastomer |
| Cable Type | Corrugated & Interlocked Metal Clad Armor (MC) or TECK, Continuously Welded Metal Clad Armor (MCHL) |
| Armour Clamping | Earth Continuity in Contact With Metal Clad Armor |
| Sealing Technique | CMP Unique Displacement Seal Concept |
| Sealing Area(s) | Cable Outer Jacket |
| Accessories | Adaptor/Reducer, Earth Tag, Locknut, Serrated Washer, Entry Thread Seal, Shroud |
**Integral equipment interface "O" Ring seal supplied as standard only with aluminum versions.
Please note the following installation requirements:
1) Where explosion proof enclosures are being used the TMC must be installed with an approved pouring or compound sealing fitting. In Division 2 locations the TMC can be fitted directly to an enclosure which has no source of ignition in accordance with NEC/CEC requirements.
2) Connectors with NPT entry threads are suitable for both Divisions and Zones.
3) Connectors with Metric entry threads are suitable for Zones only unless fitted with an approved NPT male adaptor in accordance with CEC requirements.
Additional information
- Fitting Instructions
- Languages - Coming Soon
- Installation Video - Coming Soon
- Printer Friendly
