SS2K/TA Increased Safety Ex e Cable Gland
CMP Type SS2K/TA Increased Safety (Type 'e') indoor and outdoor cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas with Steel Tape Armour cables. This cable gland provides earth bonding of the metallic tape armour and an environmental seal on the cable outer sheath. Suitable for use Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas, this cable gland design affords extra stability and superior resistance to cable pull out.
All CMP Cable Glands are EMC Tested.
The CMP SS2K/TA Cable Gland is suitable for use with Increased safety Type e and Flameproof Type d enclosures that are equipped with a secondary Increased Safety Type e terminal enclosure (i.e. Ex de) provided always that no source of ignition prevails and the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
Cable Gland Selection Table
- View Metric Table
- View Imperial Table
| Cable Gland Size | Available Entry Threads "C" | Min Thread Length "E" | Diameter Over Tape Armour "A" | Overall Cable Diameter "B" | Across Flats "D" | Across Corners "D" | Protrusion Length "F" | Ordering Reference (Brass Metric) # | Shroud Ref * | Cable Gland Weight (Kgs) | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Option | Min | Max | Min | Max | Max | Max | |||||||
| Metric | NPT | NPT | ||||||||||||
| 20S/16 | M20 | 1/2" | 3/4" | 15.0 | 3.2 | 7.7 | 3.1 | 8.7 | 24.0 | 26.4 | 42.0 | 20S16SS2KTA1RA | PVC04 | 0.072 |
| 20S | M20 | 1/2" | 3/4" | 15.0 | 6.1 | 10.7 | 6.1 | 11.7 | 24.0 | 26.4 | 42.0 | 20SSS2KTA1RA | PVC04 | 0.072 |
| 20 | M20 | 1/2" | 3/4" | 15.0 | 6.5 | 13.0 | 6.5 | 14.0 | 27.0 | 29.7 | 47.0 | 20SS2KTA1RA | PVC05 | 0.079 |
| 25 | M25 | 3/4" | 1" | 15.0 | 11.1 | 19.0 | 11.1 | 20.0 | 36.0 | 39.6 | 56.0 | 25SS2KTA1RA | PVC09 | 0.149 |
| 32 | M32 | 1" | 1 1/4" | 15.0 | 17.0 | 25.3 | 17.0 | 26.3 | 41.0 | 45.1 | 58.0 | 32SS2KTA1RA | PVC10 | 0.170 |
| 40 | M40 | 1 1/4" | 1 1/2" | 15.0 | 23.5 | 31.2 | 22.0 | 32.2 | 50.0 | 55.0 | 60.0 | 40SS2KTA1RA | PVC13 | 0.224 |
| 50S | M50 | 1 1/2" | 2" | 15.0 | 31.0 | 37.2 | 29.5 | 38.2 | 55.0 | 60.5 | 62.0 | 50SSS2KTA1RA | PVC15 | 0.298 |
| 50 | M50 | 2" | 2 1/2" | 15.0 | 35.6 | 43.1 | 35.6 | 44.1 | 60.0 | 66.0 | 64.0 | 50SS2KTA1RA | PVC18 | 0.308 |
| 63S | M63 | 2" | 2 1/2" | 15.0 | 41.5 | 49.0 | 40.1 | 50.1 | 70.0 | 77.0 | 66.0 | 63SSS2KTA1RA | PVC21 | 0.480 |
| 63 | M63 | 2 1/2" | 3" | 15.0 | 47.2 | 55.0 | 47.2 | 56.0 | 75.0 | 82.5 | 67.0 | 63SS2KTA1RA | PVC23 | 0.458 |
| 75S | M75 | 2 1/2" | 3" | 15.0 | 54.0 | 61.0 | 52.8 | 62.0 | 79.0 | 86.9 | 68.0 | 75SSS2KTA1RA | PVC24 | 0.621 |
| 75 | M75 | 3" | 3 1/2" | 15.0 | 61.1 | 67.0 | 59.1 | 68.0 | 84.0 | 92.4 | 70.0 | 75SS2KTA1RA | PVC26 | 0.526 |
| 90 | M90 | 3" | 3 1/2" | 15.0 | 66.6 | 79.0 | 66.6 | 79.4 | 108.0 | 118.8 | 75.0 | 90SS2KTA1RA | PVC31 | 1.795 |
| 100 | M100 | 4" | - | 15.0 | 76.0 | 90.0 | 76.0 | 91.0 | 122.0 | 134.2 | 81.0 | 100SS2KTA1RA | LSF32 | 2.100 |
| 115 | M115 | - | - | 15.0 | 86.0 | 97.0 | 86.0 | 98.0 | 138.0 | 151.8 | 85.0 | 115SS2KTA1RA | LSF34 | 3.096 |
| 130 | M130 | - | - | 15.0 | 97.0 | 114.0 | 97.0 | 115.0 | 154.0 | 169.4 | 92.0 | 130SS2KTA1RA | LSF35 | 4.530 |
| Dimensions are displayed in millimetres unless otherwise stated | ||||||||||||||
NOTE: *CMP SOLO LSF Halogen Free Shrouds available on request. # Other thread forms, materials and finishes are available. IEC Ex and ATEX hazardous area certification marking included as standard. Please consult CMP for any other requirement.
NOTE: *CMP SOLO LSF Halogen Free Shrouds available on request. # Other thread forms, materials and finishes are available. IEC Ex and ATEX hazardous area certification marking included as standard. Please consult CMP for any other requirement.
| TECHNICAL DATA | ||||||
|
|
||||||
| GOST R Certificate Number | POCC GB.HO06.B00207 |
| GOST R Code of Protection Category | Ex e II X / DIP A21 |
| GOST R Compliance Standards | ГOCT P 52350.0-2005, ГOCT P 52350.1-2005, ГOCT P 52350.7-2005, ГOCT MЭK 61241-1-1-99 |
| GOST GGTN Permit | PPC 00-40706 |
| GOST K Certificate Number | KZ 75000361 01 01 14761 |
| RoK Permit For Use Number | 19-02-UL-1957 |
| INMETRO Approval Certificate Number. | AEX-13169-X |
| INMETRO Code of Protection Category | BR-Ex e II / 1P66W |
| INMETRO Compliance Standards | ABNT NBR IEC 60079-0:2006, ABNT NBR IEC 60079-1:2007, TEC 60079-7:2001, e ABNT NBR IEC 60529:2005 |
| NEPSI Certificate Number | GYJ081070 |
| NEPSI Code of Protection Category | Ex e II, DIP A21 TA |
| NEPSI Compliance Standards | GB3836.1/2/3-2000, GB3836.8-2003, GB12476.1-2000 |
| Type | SS2K/TA |
| Design Specification | BS 6121:Part 1:1989, EN 50262:1999 |
| ATEX Certification Detail | SIRA 06ATEX1097X |
| ATEX Code of Protection Category | ATEX  II 2 GD, Ex e II, Ex tD A21 IP66 |
| ATEX Compliance Standards | EN 60079-0, EN 60079-7, IEC 61241-0, EN 61241-1 |
| IEC Ex Certification Detail | IECEx SIR 06.0041X |
| IEC Ex Code of Protection Category | Ex e II, Ex tD A21 IP66 |
| IEC Ex Compliance Standards | IEC 60079-0, IEC 60079-7, IEC 61241-0 |
| Continuous Operating Temperature | -60°C to +130°C |
| Cable Gland Material | Brass, Electroless Nickel Plated Brass, Aluminium, Stainless Steel |
| Seal Material | CMP Formulated Thermoplastic Elastomer |
| Cable Type | Steel Tape Armour (STA) |
| Sealing Technique | CMP Unique Displacement Seal Concept |
| Sealing Area(s) | Steel Tape Armour and Cable Outer Sheath |
| Accessories | Adaptor/Reducer, Earth Tag, Locknut, Serrated Washer, Entry Thread Seal, Shroud |
Additional information
- Fitting Instructions
- Languages - Coming Soon
- Installation Video - Coming Soon
- Printer Friendly
Video Coming Soon
