Our Product Finder tool allows you to find the perfect product for your requirements.
оронавирус COVID–19: Информация для клиентов касательно коронавируса COVID-19
оронавирус COVID–19: Информация для клиентов касательно коронавируса COVID-19
When selecting and installing certified electrical equipment and components in potentially Explosive Atmospheres, it is the users responsibility to ensure that the local industry codes of practice are observed and followed, for example EN 60079-14, IEC 60079-14 or NFPA 70 / NEC 500.
| To determine ordering reference please select from the tables below in the following order: Product Type - Form of Protection - Option (if required) - Thread Form - Thread Size - Thread From (if applicable) - Thread Size (if applicable) - Material |
|||||||
| Product Type | Form of Protection | Options | Male Thread Form | Male Thread Size | Female Thread Form | Female Thread Size | Material |
| From Product Page | From Table A Below | From Table B Below | From Table C Below | From Table D Below | From Table C Below | From Table D Below | From Table E Below |
| 737 | E | R | M | 2 | M | 2 | 5 |
| Code | Form of Protection |
| D | Group II Dual Certified Ex d & Ex e |
| E | Group II Increased Safety Ex e |
| G | General Purpose/Industrial |
| M | Group I Mining (Ex d) |
| Code | Options |
| A | Type A (eg. externally secured - non tamper-proof Ex d Stopper Plug) |
| B | Type B (eg. internally secured - tamper-proof Ex d Stopper Plug) |
| R | Optional equipment interface 'O' ring seal |
| Code | Thread Form |
| M | Metric |
| N | NPSM |
| T | NPT |
| P | PG |
| B | BSPP |
| I | E.T. (Imperial) |
| S | BSPT |
| Code | Thread Size | ||||||
| Metric "M" |
NPSM "N" |
NPT "T" |
PG "P" |
BSP "B" |
Imperial "I" |
BSP "S" |
|
| 1A | - | - | - | 7 | - | - | - |
| 1 | 16 | 1/2" | 1/2" | 9 | 1/2" | 5/8" | 1/2" |
| 2 | 20 | 3/4" | 3/4" | 11 | 3/4" | 3/4" | 3/4" |
| 3 | 25 | 1" | 1" | 13.5 | 1" | 1" | 1" |
| 4 | 32 | 1 1/4" | 1 1/4" | 16 | 1 1/4" | 1 1/4" | 1 1/4" |
| 5 | 40 | 1 1/2" | 1 1/2" | 21 | 1 1/2" | 1 1/2" | 1 1/2" |
| 6 | 50 | 2" | 2" | 29 | 2" | 2" | 2" |
| 7 | 63 | 2 1/2" | 2 1/2" | 36 | 2 1/2" | 2 1/2" | 2 1/2" |
| 8 | 75 | 3" | 3" | 42 | 3" | 3" | 3" |
| 9 | 90 | 3 1/2" | 3 1/2" | 48 | 3 1/2" | 3 1/2" | 3 1/2" |
| 10 | 100 | 4" | 4" | - | 4" | 4" | 4" |
Note: Other thread sizes available on request
Nominal dimensions shown in this table may vary due to material availability. All dimensions shown are in millimetres unless otherwise stated. Within the parameters of its Explosive Atmosphere certification, CMP Products reserves the right to change the design and/or dimensions of any of the products illustrated without notice. For further information, please contact CMP Products.
| Code | Material |
| * | Brass |
| 1 | Aluminium |
| 2 | Nylon |
| 3 | Mild Steel |
| 4 | Stainless Steel 316 |
| 5 | Nickel Plated Brass |
