PXSS2K Cable Connector

Electroless Nickel Plated Brass

Click thumbnails for alternate materials

logos

PXSS2K Hazardous Location Cable Connector

CMP Type PXSS2K Class I Division 1, C and D, Division 2, ABCD Cable Connector for use with Non-Armored Marine & Tray Cable (Type TC) and Extra-Hard Usage Cord, providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer jacket. In addition this cCSAus listed cable connector also offers Class I Zone I, Ex d IIC, Ex e II certification.

All CMP Cable Connectors are EMC Tested.

More +

Less -

The cable connector provides mechanical cable retention. A combined detachable spacer and compound tube allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.

The PXSS2K cable connector offers Nema 4X and IP68 ingress protection and is supplied in Electroless Nickel Plated Brass CuZn39Pb3 (CW614N) to EN12168 as standard. The PXSS2K is also IEC Ex Triple Certified Ex d, Ex e & Ex nR, offering a single solution that can be employed in accordance with both NEC and IEC codes of installation.

Cable Gland Selection Table

  • View Metric Table
  • View Imperial Table
Cable Connector Size Available Entry Threads "C" Minimum Thread Length "E" Diameter Over Conductors "A" Number Of Cores Overall Cable Diameter "B" Across Flats "D" Across Corners "D" Protrusion Length "F" Ordering Reference (NP Brass NPT) Shroud Ref* Cable Connector Weight (Kgs)
Standard Option NPT Metric Max Max Min Max Max Max
NPT NPT Metric
20S/16 1/2" 3/4" M20 16.0 15.0 12.6 11 3.1 8.7 30.5 33.6 58.5 20S16PXSS2K1RA531 PVC04 0.161
20S 1/2" 3/4" M20 16.0 15.0 12.6 11 6.1 11.7 30.5 33.6 58.5 20SPXSS2K1RA531 PVC04 0.161
20 1/2" 3/4" M20 16.0 15.0 12.6 21 6.5 14.0 30.5 33.6 60.5 20PXSS2K1RA531 PVC05 0.201
20L 1/2" 3/4" M20 16.0 15.0 12.6 21 10.0 15.9 30.5 33.6 60.5 20LPXSS2K1RA531 PVC05 0.201
25 3/4" 1" M25 17.0 15.0 17.5 38 11.1 20.0 37.5 40.5 67.5 25PXSS2K1RA532 PVC09 0.324
32 1" 1 1/4" M32 20.0 15.0 23.6 59 17.0 26.3 46.0 51.0 69.5 32PXSS2K1RA533 PVC10 0.447
32L 1" 1 1/4" M32 20.0 15.0 23.6 59 20.1 27.4 46.0 51.0 69.5 32LPXSS2K1RA533 PVC10 0.447
40 1 1/4" 1 1/2" M40 20.0 15.0 30.0 89 22.0 32.1 55.0 61.0 78.0 40PXSS2K1RA534 PVC13 0.483
50S 1 1/2" 2" M50 20.0 15.0 36.6 115 29.5 38.2 60.0 66.5 75.5 50SPXSS2K1RA535 PVC15 0.487
50 2" 2 1/2" M50 23.0 15.0 41.0 115 35.6 44.1 70.0 78.6 80.5 50PXSS2K1RA536 PVC18 0.499
63S 2" 2 1/2" M63 23.0 15.0 47.9 140 40.1 50.1 75.0 83.2 91.5 63SPXSS2K1RA536 PVC21 0.567
63 2 1/2" 3" M63 25.0 15.0 53.7 140 47.2 56.0 80.0 89.0 92.0 63PXSS2K1RA537 PVC23 0.587
75S 2 1/2" 3" M75 25.0 15.0 59.8 140 52.8 62.0 89.0 101.6 99.0 75SPXSS2K1RA537 PVC24 0.925
75 3" 3 1/2" M75 36.0 15.0 64.3 140 59.1 68.0 99.0 111.1 102.0 75PXSS2K1RA538 PVC26 1.046
90 3 1/2" 4" M90 36.0 15.0 75.3 140 66.6 79.4 114.0 128.6 120.0 90PXSS2K1RA539 PVC31 1.046
Dimensions are displayed in millimeters unless otherwise stated

NOTE: CMP SOLO LSF Halogen Free Shrouds also available on request.

NOTE: CMP SOLO LSF Halogen Free Shrouds also available on request.

TECHNICAL DATA
Lloyds Approval No. 01/00172
DNV Approval No. E-10496
ABS Approval No. 01-LD234401A/2-PDA
INMETRO Approval Certificate No. AEX-10786-X
INMETRO Code of Protection Category BR - Ex d IIC / BR - Ex e II - IP66
INMETRO Compliance Standards ABNT NBR IEC 60079-0:2006, ABNT NBR IEC 60079-1:2007, IEC 60079-7:2001 e ABNT NBR IEC 60529:2005
GOST R Certificate Number POCC GB.HO06.B00207
GOST R Code of Protection Category Ex d IIC / Ex e II / DIP A21 / Ex d I / Ex e I
GOST R Compliance Standards ГOCT P 52350.0-2005, ГOCT P 52350.1-2005,
ГOCT P 52350.7-2005, ГOCT MЭK 61241-1-1-99
GOST GGTN Permit PPC 00-40706
GOST K Certificate Number KZ 75000361 01 01 14761
RoK Permit For Use Number 19-02-UL-1957
NEPSI Certificate Number GYJ081070
NEPSI Code of Protection Category Ex d IIC, Ex e II, Ex nR II, DIP A21 TA
NEPSI Compliance Standards GB3836.1/2/3-2000, GB3836.8-2003, GB12476.1-2000
RETIE Approval Number 03866
Type PXSS2K
Design Specification BS 6121:Part 1:1989, EN 50262:1999, UL 514B,
UL 886, UL 2225, UL 2227, IEC 62444:2010
ATEX Certification Detail SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Code of Protection Category ATEX ATEX Approved II 2 GD, Ex d IIC, Ex e II, Ex tD A21 IP66; ATEX ATEX Approved II 3 G Ex nR, ATEX ATEX Approved IM2. Ex d I, Ex e I
ATEX EN Compliance Standards EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 61241-0, EN 61241-1
IEC Ex Certification Detail IECEx SIR 06.0044X
IEC Ex Code of Protection Category Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66, Ex d I, Ex e I
IEC Ex Compliance Standards IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 60079-15, IEC 61241-0, IEC 61241-1
cCSAus Approval Certificate No. 2288626
cCSAus Code of Protection Category Class I, Div. 1, Groups C and D; Div 2, Groups A, B, C and D; Class II, Div. 1, Groups E, F, and G; Div. 2, Groups F and G; Class III, Div. 1, 2; Class I Zone 1 Ex d IIC / Ex e II
cCSAus Compliance Standards CAN/CSA-C22.2 No 0-M91, CAN/CSA-C22.2 No 18-04, CAN/CSA-C22.2 No 25-1966 Locations, CAN/CSA-C22.2 No 30-M1986 Locations – Industrial Products, CAN/CSA-C22.2 No.174-M1984, CAN/CSA-C22.2 No.94-M91, CAN/CSA-E60079-0:07 General Requirements, CAN/CSA-E60079-7:07 Increase Safety “e”, CAN/CSA-E60079-1:07 Flameproof, CAN/CSA-E61241-1-1 Part 1-1, ANSI/UL 514B Edition 5, ANSI/UL 50 Edition 11, ANSI/UL 2225 Edition 4 Locations, UL60079-0:07 General Requirements, UL60079-7:07 Increase Safety “e”, UL60079-1:07 Flameproof
Continuous Operating Temperature -60°C to +100°C
Ingress Protection Rating IP66, IP67, IP68
Ingress Protection Document 5046 C549J
Deluge Protection Compliance DTS01 : 91
Deluge Protection Document 5046 C549J-D
Nema Rating NEMA 4X
Cable Gland Material Electroless Nickel Plated Brass, Brass, Aluminum, Stainless Steel
Seal Material CMP SOLO LSF / Epoxy Resin Barrier Compound
Material Safety Data Sheet Hardener / Resin
Cable Type Non-Armoured Marine & Tray Cable (TC) and
Extra-Hard Usage Cord
Sealing Technique CMP Unique Displacement Seal Concept
Sealing Area(s) Inner Compound Barrier & Outer Sheath
Accessories Adaptor/Reducer, Earth Tag, Locknut, Serrated Washer, Entry Thread Seal, Shroud

Note:

Additional information

Close [-]

Video Coming Soon

CMP WP PXSS2K_Connector_0311