PXSS2K Flameproof Ex d, Increased Safety Ex e, Restricted Breathing Ex nR Compound Barrier Cable Gland

CMP Type PXSS2K Triple Certified Flameproof (Type d), Increased Safety (Type e) and Restricted Breathing (Type R) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of unarmoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath.
All CMP Cable Connectors are EMC Tested.
The cable gland provides mechanical cable retention. A combined detachable spacer and compound tube allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re-connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.
The CMP PXSS2K cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.
Cable Gland Selection Table
- View Metric Table
- View Imperial Table
| Cable Gland Size | Available Entry Threads "C" | Min Thread Length "E" | Number Of Cores | Diameter Over Conductors "A" | Overall Cable Diameter "B" | Across Flats "D" | Across Corners "D" | Protrusion Length "F" | Ordering Reference (Brass Metric) # | PVC Shroud Ref* | Cable Gland Weight (Kgs) | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Option | Max | Max | Min | Max | Max | Max | |||||||
| Metric | NPT | NPT | ||||||||||||
| 20S/16 | M20 | 1/2" | 3/4" | 15.0 | 12.6 | 11.0 | 3.1 | 8.7 | 30.5 | 33.6 | 58.5 | 2016SPXSS2K1RA | PVC04 | 0.200 |
| 20S | M20 | 1/2" | 3/4" | 15.0 | 12.6 | 11.0 | 6.1 | 11.7 | 30.5 | 33.6 | 58.5 | 20SPXSS2K1RA | PVC04 | 0.200 |
| 20 | M20 | 1/2" | 3/4" | 15.0 | 12.6 | 21.0 | 6.5 | 14.0 | 30.5 | 33.6 | 60.5 | 20PXSS2K1RA | PVC05 | 0.250 |
| 25 | M25 | 3/4" | 1" | 15.0 | 17.5 | 38.0 | 11.1 | 20.0 | 37.5 | 41.3 | 67.5 | 25PXSS2K1RA | PVC09 | 0.403 |
| 32 | M32 | 1" | 1 1/4" | 15.0 | 23.6 | 59.0 | 17.0 | 26.3 | 46.0 | 50.6 | 69.5 | 32PXSS2K1RA | PVC10 | 0.555 |
| 40 | M40 | 1 1/4" | 1 1/2" | 15.0 | 30.0 | 89.0 | 22.0 | 32.1 | 55.0 | 60.5 | 78.0 | 40PXSS2K1RA | PVC13 | 0.600 |
| 50S | M50 | 1 1/2" | 2" | 15.0 | 36.6 | 115.0 | 29.5 | 38.2 | 60.0 | 66.0 | 75.5 | 50SPXSS2K1RA | PVC15 | 0.605 |
| 50 | M50 | 2" | 2 1/2" | 15.0 | 41.0 | 115.0 | 35.6 | 44.1 | 70.0 | 77.0 | 80.5 | 50PXSS2K1RA | PVC18 | 0.620 |
| 63S | M63 | 2" | 2 1/2" | 15.0 | 47.9 | 140.0 | 40.1 | 50.1 | 75.0 | 82.5 | 91.5 | 63SPXSS2K1RA | PVC21 | 0.705 |
| 63 | M63 | 2 1/2" | 3" | 15.0 | 53.7 | 140.0 | 47.2 | 56.0 | 80.0 | 88.0 | 92.0 | 63PXSS2K1RA | PVC23 | 0.730 |
| 75S | M75 | 2 1/2" | 3" | 15.0 | 59.8 | 140.0 | 52.8 | 62.0 | 89.0 | 97.9 | 99.0 | 75SPXSS2K1RA | PVC24 | 1.150 |
| 75 | M75 | 3" | 3 1/2" | 15.0 | 64.3 | 140.0 | 59.1 | 68.0 | 99.0 | 108.9 | 102.0 | 75PXSS2K1RA | PVC26 | 1.150 |
| 90 | M90 | 3" | 3 1/2" | 15.0 | 75.3 | 140.0 | 66.6 | 79.4 | 114.0 | 125.4 | 120.0 | 90PXSS2K1RA | PVC31 | 2.700 |
| 100 | M100 | 4" | - | 15.0 | 85.6 | 200.0 | 80.0 | 90.9 | 133.0 | 146.3 | 135.0 | 100PXSS2K1RA | LSF32 | 3.400 |
| Dimensions are displayed in millimetres unless otherwise stated | ||||||||||||||
NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes. # Other thread forms, materials and finishes are available. IEC Ex, ATEX and cCSAus hazardous area certification marking included as standard. Please consult CMP for any other requirements.
NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes. Marine Approvals including Lloyds, DNV & ABS are also available from CMP Products. # Other thread forms, materials and finishes are available. IEC Ex and ATEX (Group I and II) hazardous area certification marking included as standard. Please consult CMP for any other requirements.
| TECHNICAL DATA | |||||||||
|
|
|||||||||
| cCSAus Approval Certificate No. | 2288626 |
| cCSAus Code of Protection Category | Class I, Div. 1, Groups C and D; Div 2, Groups A, B, C and D; Class II, Div. 1, Groups E, F, and G; Div. 2, Groups F and G; Class III, Div. 1, 2; Class I Zone 1 Ex d IIC / Ex e II |
| cCSAus Compliance Standards | CAN/CSA-C22.2 No 0-M91, CAN/CSA-C22.2 No 18-04, CAN/CSA-C22.2 No 25-1966 Locations, CAN/CSA-C22.2 No 30-M1986 Locations – Industrial Products, CAN/CSA-C22.2 No.174-M1984, CAN/CSA-C22.2 No.94-M91, CAN/CSA-E60079-0:07 General Requirements, CAN/CSA-E60079-7:07 Increase Safety “e�, CAN/CSA-E60079-1:07 Flameproof, CAN/CSA-E61241-1-1 Part 1-1, ANSI/UL 514B Edition 5, ANSI/UL 50 Edition 11, ANSI/UL 2225 Edition 4 Locations, UL60079-0:07 General Requirements, UL60079-7:07 Increase Safety “e�, UL60079-1:07 Flameproof |
| GOST R Certificate Number | POCC GB.HO06.B00207 |
| GOST R Code of Protection Category | Ex d IIC / Ex e II / DIP A21 / Ex d / Ex e I |
| GOST R Compliance Standards | ГOCT P 52350.0-2005, ГOCT P 52350.1-2005, ГOCT P 52350.7-2005, ГOCT MÐK 61241-1-1-99 |
| GOST GGTN Permit | PPC 00-40706 |
| GOST K Certificate Number | KZ 75000361 01 01 14761 |
| RoK Permit For Use Number | 19-02-UL-1957 |
| Lloyds Approval No. | 01/00172 |
| DNV Approval No. | E-10496 |
| ABS Approval No. | 01-LD234401A/2-PDA |
| INMETRO Approval Certificate No. | AEX-10786-X |
| INMETRO Code of Protection Category | BR - Ex d IIC / BR - Ex e II - IP66 |
| INMETRO Compliance Standards | ABNT NBR IEC 60079-0:2006, ABNT NBR IEC 60079-1:2007, IEC 60079-7:2001 e ABNT NBR IEC 60529:2005 |
| NEPSI Certificate Number | GYJ081070 |
| NEPSI Code of Protection Category | Ex d IIC, Ex e II, Ex nR II, DIP A21 TA |
| NEPSI Compliance Standards | GB3836.1/2/3-2000, GB3836.8-2003, GB12476.1-2000 |
| RETIE Approval Number | 03866 |
| Type | PXSS2K |
| Design Specification | BS 6121:Part 1:1989, EN 50262:1999, UL 514B, UL 886, UL 2225, UL 2227 |
| ATEX Certification Detail | SIRA 06ATEX1097X, SIRA07ATEX4326X |
| ATEX Code of Protection Category | ATEX  II 2 GD, Ex d IIC, Ex e II, Ex tD A21 IP66, ATEX
II 3 G Ex nR II |
| ATEX Compliance Standards | EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, IEC 61241-0, EN 61241-1 |
| IEC Ex Certification Detail | IECEx SIR 06.0044X |
| IEC Ex Code of Protection Category | Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66, Ex d I, Ex e I |
| IEC Ex Compliance Standards | IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 60079-15, IEC 61241-0, IEC 61241-1 |
| Continuous Operating Temperature | -60°C to +100°C |
| Ingress Protection Rating | IP66, IP67, IP68 |
| Ingress Protection Document | 5046 C549J |
| Deluge Protection Compliance | DTS01 : 91 |
| Deluge Protection Document | 5046 C549J-D |
| Nema Rating | NEMA 4X |
| Cable Gland Material | Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium |
| Seal Material | CMP SOLO LSF Thermoplastic Elastomer / Epoxy Resin Barrier Compound | Material Safety Data Sheet | Hardener / Resin |
| Cable Type | Unarmoured |
| Sealing Technique | CMP Unique Displacement Seal Concept |
| Sealing Area(s) | Inner Compound Barrier & Outer Sheath |
| Accessories | Adaptor/Reducer, Earth Tag, Locknut, Serrated Washer, Entry Thread Seal, Shroud |
Additional information
- Fitting Instructions
- Languages - Coming Soon
- Installation Video - Coming Soon
- Printer Friendly
Video Coming Soon
