PX2K Cable Gland

Brass

Click thumbnails for alternate materials

logos

PX2K Flameproof Ex d, Increased Safety Ex e, Restricted Breathing Ex nR Compound Barrier Cable Gland

CMP Type PX2K Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of armoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath.

All CMP Cable Connectors are EMC Tested.

Click for more details

The cable gland provides mechanical cable retention and electrical continuity via armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.

The CMP PX2K cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 provided always that the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.

Note: Dedicated version for Steel Wire Armour type is PX2KW. Dedicated version for all other Armour types is PX2KX
Note: This standard design concept is also suitable for installation in systems complying with NEC wiring code rules.

Cable Gland Selection Table

  • View Metric Table
  • View Imperial Table
Cable Gland Size Available Entry Threads "C" Min Thread Length "E" Number Of Cores Diameter Over Conductors "A" Overall Cable Diameter "B" Armour Range + Across Flats "D" Across Corners "D" Protrusion Length "F" Ordering Reference (Brass Metric) # Shroud Ref* Cable Gland Weight (Kgs)
Standard Option Max Max Min Max Grooved Cone Stepped Cone Max Max
Metric NPT NPT Min Max Min Max
20S/16 M20 1/2" 3/4" 15.0 11.0 12.6 6.1 11.5 0.15 0.5 0.8 1.0 30.5 33.6 58.5 20S16PX2K1RA PVC06 0.200
20S M20 1/2" 3/4" 15.0 11.0 12.6 9.5 15.9 0.15 0.5 0.8 1.25 30.5 33.6 58.5 20SPX2K1RA PVC06 0.200
20 M20 1/2" 3/4" 15.0 21.0 12.6 12.5 20.9 0.2 0.5 0.8 1.25 30.5 33.6 60.5 20PX2K1RA PVC06 0.230
25S M25 3/4" 1" 15.0 38.0 17.5 14.0 22.0 0.2 0.6 1.25 1.6 37.5 41.3 67.5 25SPX2K1RA PVC09 0.330
25 M25 3/4" 1" 15.0 38.0 17.5 18.2 26.2 0.2 0.6 1.25 1.6 37.5 41.3 67.5 25PX2K1RA PVC09 0.330
32 M32 1" 1 1/4" 15.0 59.0 23.6 23.7 33.9 0.2 0.6 1.6 2.0 46.0 50.6 69.5 32PX2K1RA PVC11 0.510
40 M40 1 1/4" 1 1/2" 15.0 89.0 30.0 27.9 40.4 0.2 0.8 1.6 2.0 55.0 60.5 78.0 40PX2K1RA PVC15 0.720
50S M50 1 1/2" 2" 15.0 115.0 36.6 35.2 46.7 0.2 0.8 2.0 2.5 60.0 66.0 75.5 50SPX2K1RA PVC18 0.825
50 M50 2" 2 1/2" 15.0 115.0 41.0 40.4 53.1 0.3 0.8 2.0 2.5 70.0 77.0 80.5 50PX2K1RA PVC21 0.860
63S M63 2" 2 1/2" 15.0 140.0 47.9 45.6 59.4 0.3 0.8 2.0 2.5 75.0 82.5 91.5 63SPX2K1RA PVC23 1.450
63 M63 2 1/2" 3" 15.0 140.0 53.7 54.6 65.9 0.3 0.8 2.0 2.5 80.0 88.0 92.0 63PX2K1RA PVC25 1.600
75S M75 2 1/2" 3" 15.0 140.0 59.9 59.0 72.1 0.3 0.8 2.0 2.5 89.0 97.9 99.0 75SPX2K1RA PVC28 2.300
75 M75 3" 3 1/2" 15.0 140.0 64.3 66.7 78.5 0.3 0.8 2.5 3.0 99.0 108.9 102.0 75PX2K1RA PVC30 3.050
90 M90 3 1/2" 4" 15.0 140.0 75.3 76.2 90.4 0.4 0.8 3.0 3.5 114.0 125.4 120.0 90PX2K1RA PVC32 5.000
100 M100 4" - 15.0 200.0 85.6 86.1 101.5 0.4 0.8 3.15 4.0 133.0 146.3 135.0 100PX2K1RA LSF33 6.000
Dimensions are displayed in millimetres unless otherwise stated

NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes. # Other thread forms, materials and finishes are available. IEC Ex, ATEX & cCSAus hazardous area certification marking included as standard. The PX2K is supplied in kit form inclusive of two detachable armour cones. The Stepped Cone (W) is suitable for SWA cables, and the Grooved Cone (X) is suitable for all other approved armoured cables. Please consult CMP for any other requirements.

NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes. # Other thread forms, materials and finishes are available. IEC Ex, ATEX & cCSAus hazardous area certification marking included as standard. The PX2K is supplied in kit form inclusive of two detachable armour cones. The Stepped Cone (W) is suitable for SWA cables, and the Grooved Cone (X) is suitable for all other approved armoured cables. Please consult CMP for any other requirements.

TECHNICAL DATA
cCSAus Approval Certificate No. 2288626
cCSAus Code of Protection Category Class I, Div. 1, 2, Groups A, B, C and D; Class II, Div. 1, Groups E, F, and G; Div. 2, Groups F and G; Class III, Div. 1, 2; Class I Zone 1
cCSAus Compliance Standards CAN/CSA-C22.2 No 0-M91, CAN/CSA-C22.2 No 18-04, CAN/CSA-C22.2 No 25-1966 Locations, CAN/CSA-C22.2 No 30-M1986 Locations – Industrial Products, CAN/CSA-C22.2 No.174-M1984, CAN/CSA-C22.2 No.94-M91, CAN/CSA-E60079-0:07 General Requirements, CAN/CSA-E60079-7:07 Increase Safety “e”, CAN/CSA-E60079-1:07 Flameproof, CAN/CSA-E61241-1-1 Part 1-1, ANSI/UL 514B Edition 5, ANSI/UL 50 Edition 11, ANSI/UL 2225 Edition 4 Locations, UL60079-0:07 General Requirements, UL60079-7:07 Increase Safety “e”, UL60079-1:07 Flameproof
GOST R Certificate Number POCC GB.HO06.B00207
GOST R Code of Protection Category Ex d IIC / Ex e II / DIP A21
GOST R Compliance Standards ГOCT P 52350.0-2005, ГOCT P 52350.1-2005,
ГOCT P 52350.7-2005, ГOCT MЭK 61241-1-1-99
GOST GGTN Permit PPC 00-40706
GOST K Certificate Number KZ 75000361 01 01 14761
RoK Permit For Use Number 19-02-UL-1957
Lloyds Approval No. 01/00172
DNV Approval No. E-10496
ABS Approval No. 01-LD234401A/2-PDA
INMETRO Approval Certificate No. AEX-10786-X
INMETRO Code of Protection Category BR - Ex d IIC / BR - Ex e II - IP66
INMETRO Compliance Standards ABNT NBR IEC 60079-0:2006, ABNT NBR IEC 60079-1:2007, IEC 60079-7:2001 e ABNT NBR IEC 60529:2005
NEPSI Certificate Number GYJ081070
NEPSI Code of Protection Category Ex d IIC, Ex e II, Ex nR II, DIP A21 TA
NEPSI Compliance Standards GB3836.1/2/3-2000, GB3836.8-2003, GB12476.1-2000
Type PX2K
Design Specification BS 6121:Part 1:1989, EN 50262:1999
ATEX Certification Detail SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Code of Protection Category ATEX ATEX Approved II 2 GD, Ex d IIC, Ex e II, Ex tD A21 IP66, ATEX ATEX Approved II 3 G Ex nR II, ATEX ATEX Approved IM2 Ex d I, Ex e I
ATEX Compliance Standards EN 60079-0, EN 60079-1, EN 60079-7, IEC 61241-0, EN 61241-1
IEC Ex Certification Detail IECEx SIR 06.0044X
IEC Ex Code of Protection Category Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66, Ex d I, Ex e I
IEC Ex Compliance Standards IEC 60079-0, IEC 60079-1, IEC 60079-15, IEC 60079-7, IEC 61241-0, IEC 61241-1
Continuous Operating Temperature -60°C to +100°C
Ingress Protection Rating IP66, IP67, IP68
Ingress Protection Document 5046 C549D
Deluge Protection Compliance DTS01 : 91
Deluge Protection Document 5046 C549D-D
Cable Gland Material Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium
Seal Material CMP SOLO LSF Thermoplastic Elastomer / Epoxy Resin Barrier Compound
Material Safety Data Sheet Epoxy Compound
Cable Type Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Wire Braid Armour (e.g. SWB), Screened Flexible Wire Braid (e.g. CY / SY), Pliable Wire Armour (PWA), Steel Tape Armour (STA), Strip Armour (e.g. ASA)
Armour Clamping Detachable Compound Tube / Cone & AnyWay Universal Clamping Ring
Sealing Technique Unique CMP "LRS" TM Outer Seal (Load Retention Seal)
Sealing Area(s) Inner Compound Barrier & Outer Sheath
Accessories Adaptor/Reducer, Earth Tag, Locknut, Serrated Washer, Entry Thread Seal, Shroud

Please Note: If Tape Armour is to be used please contact CMP for advice.

Additional information

Close [-]

Video Coming Soon

CMP WP PX2K_0311