Product Finder

Product Finder

Our Product Finder tool allows you to find the perfect product for your requirements.

PX2KXREX-US | Class I, Div 1 & 2 | AEx e, AEx d, AEx nR, AEx ta | Hazardous Location Barrier Cable Gland For all types of Braided & Tape Armoured Cables

Globally Approved, Hazardous (Classified) Location Barrier Cable Gland

• RapidEx liquid pour sealing system
– Enhances reliability, reduces risk
– Reduces man hours
– Reduces cost
• Metal-to-metal armour clamping
• Direct & remote installation
• Integral protected deluge seal
• Disconnectable, union feature design
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• Globally marked, cCSAus, IECEx & ATEX
• EMC tested
• As standard in nickel plated brass with NPT thread form

Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armor (STA, DSTA) and Aluminum Strip Armor (ASA) but is also suitable for Single Wire Armor (SWA), Aluminum Wire Armor (AWA) and Pliable Wire Armor (PWA) if the range is outside that of the Stepped Cone (W).

Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armor cables. Tapes can also be doubled over. For cables that have only a single layer of armor such as SWA the clamping range should be used as shown in the table below.

For under / oversized armour wires click here

Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444
Mechanical Classifications* Impact = Level 8, Retention = Class D
Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications * Category B (Category A when used with braid, tape or pliable wire armour cables)
ATEX Certificate SIRA13ATEX1072X, SIRA13ATEX4078X
Code of Protection II 2G, II 1D, Ex d IIC, Ex e IIC Gb, Ex ta IIIC Da
II 3G Ex nR IIC Gc, IM2 Ex d I Mb, Ex e I Mb
Compliance Standards EN 60079-0,1,7,15,31
IECEx Certificate IECEx SIR 13.0027X
Code of Protection Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I Mb, Ex e I Mb
Compliance Standards IEC 60079-0,1,7,15,31
cCSAus Certificate (20s16 - 90) 2288626
CSAus Code of Protection*** Class I, Div. 1, 2 Groups A, B, C and D; Class II, Div. 1, 2 Groups E, F and G; Class III, Div. 1, 2; Type 4X: Oil Resistant II:
Class I, Zone 1 AEx d IIC Gb, AEx e IIC Gb, Class I, Zone 2 AEx nR IIC Gc,
Class I, Zone 20 AEx ta IIIC Da
cCSA Code of Protection*** Class I, Div. 1, 2 Groups A, B, C and D; Class II, Div. 1, 2 Groups E, F and G; Class III, Div. 1, 2; Type 4X: Oil Resistant II:
Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da
Compliance Standards CAN/CSA-C22.2 No 0,18,25,30,94,174, CAN/CSA-E60079-0,1,7,31 CAN/CSA-E61241-1-1 Part 1-1, ANSI/UL 514B Ed 5, ANSI/UL 50 Ed 11, ANSI/UL 2225 Ed 4, UL60079
EAC Certificate (Formerly GOST R, K & B) TC RU C-GB.AA87.B.00487
UkrSEPRO UA.TR.047.C.0644-15
CCOE / PESO (India) Certificate P333688
NEPSI Certificate GYJ13.1140X, GYJ13.1282X
INMETRO Approval TÜV 12.2073X
RETIE Approval 03866
Marine Approvals LRS: 01/00172, DNV: TAE00000Y, ABS: 14-LD234401A-4-PDA, BV: 43180/A1BV
Ingress Protection Rating** IP66, IP67 & IP68
Deluge Protection Compliance DTS01 : 91
NEMA Rating** NEMA 4X
Cable Gland Material Electroless Nickel Plated Brass, Copper Free (<0.4%) Aluminium, Stainless Steel
Seal Material CMP SOLO LSF Halogen Free Thermoset Elastomer / RapidEx Resin Barrier
Cable Type Braid Armoured Shipboard cable and all IEC Braid Cables***
Armour Clamping Detachable Resin Tube / Cone & AnyWay Universal Clamping Ring
Sealing Technique Unique CMP ‘LRS’ Outer Seal (Load Retention Seal)
Sealing Area(s) Inner RapidEx Barrier Seal & Outer Sheath
Optional Accessories Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Optional Installation Tools Spanners

Note : * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
**When CMP installation accessories are used. Refer to maintaining a seal for further information
*** Where cable is permitted by code (NEC and/or CEC)
****IP68 tested to a minimum depth of 30 metres for 12 hours, alternate depths / durations can be provided upon request

Certificates

Click hereClick here to view Certificates

Product Selection Table

Click here to view Technical Illustration

Technical Illustration

Click here to view how to order

Cable Gland SizeAvailable Entry Threads ?C?
(Alternative Metric Thread Lengths Available)
Number of CoresDiameter Over Conductors
?A?
Cable Bedding Diameter ?G?Overall Cable Diameter ?B?Armor Range ?
Grooved Cone (X)
Across Corners ?D?Across Flats ?D?Across Corners ?D?Protrusion Length ?F?Combined Ordering Reference
(*Nickel Plated Brass NPT)
ShroudCable
Gland Weight (Ozs)
NPTNPT
(Option)
Metric
(Option)
Thread Length (NPT) ?E?SizeTypeOrdering Suffix
20S16½?¾?M200.78110.460.460.240.520.010.041.201.322.4420S16PX2KXREX1EX531PVC068.47
20S½?¾?M200.78110.460.460.370.630.010.041.201.322.4420SPX2KXREX1EX531PVC068.11
20½?¾?M200.78110.500.510.490.820.020.041.201.322.4820PX2KXREX1EX531PVC068.47
25S¾?1?M250.80210.690.700.550.870.020.051.481.622.7425SPX2KXREX1EX532PVC0913.05
25¾?1?M250.80210.690.700.721.030.020.051.481.622.7425PX2KXREX1EX532PVC0913.05
321?1 ¼?M320.98380.930.940.931.340.020.051.811.992.9532PX2KXREX1EX533PVC1120.11
401 ¼?1 ½?M401.01591.181.191.101.590.020.062.172.382.9540PX2KXREX1EX534PVC1528.22
50S1 ½?2?M501.03891.441.451.391.840.020.062.362.603.0350SPX2KXREX1EX535PVC1831.75
502?2 ½?M501.06891.611.631.592.090.020.062.763.033.0350PX2KXREX1EX536PVC2141.98
63S2?2 ½?M631.061151.891.911.802.340.020.062.953.253.1463SPX2KXREX1EX536PVC2349.03
632 ½?3?M631.571152.112.132.152.590.020.063.153.473.1663PX2KXREX1EX537PVC2549.74
75S2 ½?3?M751.571402.362.372.322.840.020.063.543.903.4275SPX2KXREX1EX537PVC2873.72
753?3 ½?M751.631402.532.532.633.090.020.063.944.333.4875PX2KXREX1EX538PVC3089.60
903 ½?4?M901.692002.972.983.003.560.030.064.534.984.0290PX2KXREX1EX539PVC32130.87
1003 ½?4?M1001.732003.373.383.393.990.030.065.005.504.49100PX2KXREX1EX5310LSF33169.67
Dimensions displayed in inches otherwise stated
Cable Gland SizeAvailable Entry Threads ?C?
(Alternative Metric Thread Lengths Available)
Number of CoresDiameter Over Conductors
?A?
Cable Bedding Diameter ?G?Overall Cable Diameter ?B?Armor Range ?
Grooved Cone (X)
Across Corners ?D?Across Flats ?D?Across Corners ?D?Protrusion Length ?F?Combined Ordering Reference
(*Nickel Plated Brass NPT)
ShroudCable
Gland Weight (Kgs)
NPTNPT
(Option)
Metric
(Option)
Thread Length (NPT) ?E?SizeTypeOrdering Suffix
20S16½?¾?M2019.81111.711.76.113.20.31.030.533.562.020S16PX2KXREX1EX531PVC060.24
20S½?¾?M2019.81111.711.79.416.00.31.030.533.562.020SPX2KXREX1EX531PVC060.23
20½?¾?M2019.81112.713.012.420.80.41.030.533.563.020PX2KXREX1EX531PVC060.24
25S¾?1?M2520.32117.517.814.022.10.41.237.641.169.625SPX2KXREX1EX532PVC090.37
25¾?1?M2520.32117.517.818.326.20.41.237.641.169.625PX2KXREX1EX532PVC090.37
321?1 ¼?M3224.93823.623.923.634.00.41.246.050.574.932PX2KXREX1EX533PVC110.57
401 ¼?1 ½?M4025.75930.030.227.940.40.41.655.160.574.940PX2KXREX1EX534PVC150.80
50S1 ½?2?M5026.28936.636.835.346.70.41.659.966.077.050SPX2KXREX1EX535PVC180.90
502?2 ½?M5026.98940.941.440.453.10.61.670.177.077.050PX2KXREX1EX536PVC211.19
63S2?2 ½?M6326.911548.048.545.759.40.61.674.982.679.863SPX2KXREX1EX536PVC231.39
632 ½?3?M6339.911553.654.154.665.80.61.680.088.180.363PX2KXREX1EX537PVC251.41
75S2 ½?3?M7539.914059.960.258.972.10.61.689.999.186.975SPX2KXREX1EX537PVC282.09
753?3 ½?M7541.414064.364.366.878.50.61.6100.1110.088.475PX2KXREX1EX538PVC302.54
903 ½?4?M9042.920075.475.776.290.40.81.6115.1126.5102.190PX2KXREX1EX539PVC323.71
1003 ½?4?M10043.920085.685.986.1101.30.81.6127.0139.7114.0100PX2KXREX1EX5310LSF334.81
Dimensions displayed in millimeters unless otherwise stated