E2W CIEL Industrial Cable Gland
CMP E2W CIEL type brass cable gland for use with all types of Lead Covered or Lead Sheathed and Single Wire Armour (LC/SWA) cable, providing an earth bond on the inner lead sheath and an environmental seal on the cable outer sheath. Mechanical cable retention, and electrical continuity facility is provided via armour wire termination.
All CMP Cable Glands are EMC Tested.
The CMP E2W CIEL range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168.
The E2W CIEL cable gland is complete with a CMP unique Cast Integral Earth Lug concept. This is particularly suitable for use with Medium and High Voltage systems where a high level of protection against short circuit earth fault currents is required.
Cable Gland Selection Table
- View Metric Table
- View Imperial Table
| Cable Gland Size | Available Entry Threads "C" | Min Thread Length "E" | Cable Bedding Diameter "A" | Overall Cable Diameter "B" | Armour Range | Across Flats "D" | Across Corners "D" | Protrusion Length "F" | CIEL Earth Bolt Size | Earth Fault Current Rating (kA) | Ordering Reference (Brass Metric) | Cable Gland Weight (Kgs) | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Option | Min | Max | Min | Max | Min | Max | Max | Max | ||||||||
| Metric | NPT | NPT | |||||||||||||||
| 20S16 | M20 | 1/2" | 3/4" | 10.0 | 3.1 | 8.6 | 6.1 | 13.2 | 0.8 | 1.0 | 24.0 | 26.4 | 58.5 | M8 | 26 | 20S16E2WC1RA | 0.142 |
| 20S | M20 | 1/2" | 3/4" | 10.0 | 6.1 | 11.6 | 9.5 | 15.9 | 0.8 | 1.25 | 24.0 | 26.4 | 58.5 | M8 | 26 | 20SE2WC1RA | 0.142 |
| 20 | M20 | 1/2" | 3/4" | 10.0 | 6.5 | 13.9 | 12.5 | 20.9 | 0.8 | 1.25 | 30.5 | 33.6 | 60.5 | M8 | 26 | 20E2WC1RA | 0.230 |
| 25S | M25 | 3/4" | 1" | 10.0 | 11.1 | 19.9 | 14.0 | 22.0 | 1.25 | 1.6 | 37.5 | 41.3 | 67.5 | M8 | 26 | 25SE2WC1RA | 0.328 |
| 25 | M25 | 3/4" | 1" | 10.0 | 11.1 | 19.9 | 18.2 | 26.2 | 1.25 | 1.6 | 37.5 | 41.3 | 67.5 | M8 | 26 | 25E2WC1RA | 0.328 |
| 32 | M32 | 1" | 1 1/4" | 10.0 | 17.0 | 26.2 | 23.7 | 33.9 | 1.6 | 2.0 | 46.0 | 50.6 | 69.5 | M8 | 26 | 32E2WC1RA | 0.470 |
| 40 | M40 | 1 1/4" | 1 1/2" | 15.0 | 22.0 | 32.1 | 27.9 | 40.4 | 1.6 | 2.0 | 55.0 | 60.5 | 78.0 | M10 | 26 | 40E2WC1RA | 0.780 |
| 50S | M50 | 1 1/2" | 2" | 15.0 | 29.5 | 38.1 | 35.2 | 46.7 | 2.0 | 2.5 | 60.0 | 66.0 | 75.5 | M12 | 43 | 50SE2WC1RA | 0.960 |
| 50 | M50 | 2" | 2 1/2" | 15.0 | 35.6 | 44.0 | 40.4 | 53.1 | 2.0 | 2.5 | 70.0 | 77.0 | 80.5 | M12 | 43 | 50E2WC1RA | 1.150 |
| 63S | M63 | 2" | 2 1/2" | 15.0 | 40.1 | 49.9 | 45.6 | 59.4 | 2.0 | 2.5 | 75.0 | 82.5 | 91.5 | M12 | 43 | 63SE2WC1RA | 1.700 |
| 63 | M63 | 2 1/2" | 3" | 15.0 | 47.2 | 55.9 | 54.6 | 65.9 | 2.0 | 2.5 | 80.0 | 88.0 | 92.0 | M12 | 43 | 63E2WC1RA | 1.650 |
| 75S | M75 | 2 1/2" | 3" | 15.0 | 52.8 | 61.9 | 59.0 | 72.1 | 2.0 | 2.5 | 89.0 | 97.9 | 99.0 | M12 | 43 | 75SE2WC1RA | 2.600 |
| 75 | M75 | 3" | 3 1/2" | 15.0 | 59.1 | 67.9 | 66.7 | 78.5 | 2.5 | 3.0 | 99.0 | 108.9 | 102.0 | M12 | 43 | 75E2WC1RA | 3.300 |
| 90 | M90 | 3" | 3 1/2" | 15.0 | 66.6 | 79.9 | 76.2 | 90.4 | 3.15 | 3.15 | 114.0 | 125.4 | 120.0 | M12 | 43 | 90E2WC1RA | 4.850 |
| 100 | M100 | 4" | - | 15.0 | 76.0 | 90.9 | 86.1 | 101.5 | 3.15 | 4.0 | 123.0 | 135.3 | 138.0 | M12 | 43 | 100E2WC1RA | 5.950 |
| 115 | M115 | 4" | - | 15.0 | 86.0 | 97.9 | 101.5 | 110.3 | 3.15 | 4.0 | 133.4 | 146.7 | 169.0 | M12 | 43 | 115E2WC1RA | 6.435 |
| 130 | M130 | 4" | - | 15.0 | 97.0 | 114.9 | 114.2 | 123.3 | 3.15 | 4.0 | 146.1 | 167.6 | 183.0 | M12 | 43 | 130E2WC1RA | 7.720 |
| Dimensions are displayed in millimetres unless otherwise stated | |||||||||||||||||
NOTE: +Alternative armour clamping range available for non-standard armour sizes. Marine Approvals including Lloyds, DNV & ABS are also available from CMP Products.
NOTE: +Alternative armour clamping range available for non-standard armour sizes. Marine Approvals including Lloyds, DNV & ABS are also available from CMP Products.
| TECHNICAL DATA | ||||
|
|
||||
| GOST R Certificate Number | POCC GB. ГБ05.H00110 |
| GOST K Certificate Number | KZ 75000361 01 01 14761 |
| RoK Permit For Use Number | 19-02-UL-1957 |
| Type | E2W CIEL |
| Design Specification | BS 6121:Part 1:1989, EN 50262:1999, IEC 62444:2010 |
| Continuous Operating Temperature | -60°C to +150°C |
| Ingress Protection Rating | IP66 |
| Cable Gland Material | Brass, Electroless Nickel Plated Brass, Aluminium, Stainless Steel |
| Seal Material | CMP Formulated Thermoplastic Elastomer |
| Cable Type | Lead Sheathed & Single Wire Armour (LC/SWA), Lead Sheathed Aluminium Wire Armour (LC/AWA) |
| Armour Clamping | Detachable Armour Cone & AnyWay Universal Clamping Ring |
| Sealing Technique | CMP Inner Displacement Seal & Unique CMP "LRS" TM Outer Load Retention Seal |
| Sealing Area(s) | Cable Inner Bedding & Outer Cable Sheath |
| Accessories | Adaptor/Reducer, Locknut, Serrated Washer, Entry Thread Seal |
EN 50262 Mechanical Classifications - Retention = Class B, Impact = Level 8
EN 50262 Electrical Classifications - Category C
The Symmetrical Fault Current (kA) rating for 1 second applicable to the Cast Integral Earth Lug featured in the E2W CIEL products are as follows:-
26.0 kA for cable gland sizes up to 40
43.0 kA for cable gland sizes 50S and above
Additional information
- Fitting Instructions
- Languages - Coming Soon
- Installation Video - Coming Soon
- Printer Friendly
