E2U Cable Gland

Brass

Click thumbnails for alternate materials

E2U Universal Industrial Cable Gland

CMP E2U type brass indoor and outdoor cable gland for use with all types of Lead Sheathed and Armoured cables providing an environmental seal on inner lead sheath and the cable outer sheath.

All CMP Cable Glands are EMC Tested.

Click for more details

The cable gland provides mechanical cable retention and electrical continuity via the armour termination and also earth bonding of the inner lead covering or lead sheath. A reversible armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access. Separate tightening actions for the inner displacement seal and the armour termination affords maximum control over the pressure applied to the cable inner lead covering.

The CMP E2U range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168.

Note: Stepped Cone is suitable for SWA cables, Grooved Cone is suitable for all other approved armoured cables
Note: Deluge proof version available

Cable Gland Selection Table

  • View Metric Table
  • View Imperial Table
Cable Gland Size Available Entry Threads "C" Minimum Thread Length "E" Cable Lead Sheath Diameter "A" Overall Cable Diameter "B" Armour Range + Across Flats "D" Across Corners "D" Protrusion Length "F" Ordering Reference (Brass Metric) # Shroud Ref * Cable Gland Weight (Kgs)
Standard Option Min Max Min Max Grooved Cone Stepped Cone Max Max
Metric NPT NPT Min Max Min Max
20S/16 M20 1/2" 3/4" 10.0 3.1 8.6 6.1 13.2 0.4 0.8 0.8 1.0 24.0 26.4 63.0 20S16E2U1RA PVC04 0.163
20S M20 1/2" 3/4" 10.0 6.1 11.6 9.5 15.9 0.4 0.8 0.8 1.25 24.0 26.4 63.0 20SE2U1RA PVC04 0.163
20 M20 1/2" 3/4" 10.0 6.5 13.9 12.5 20.9 0.6 1.0 0.8 1.25 30.5 33.6 67.0 20E2U1RA PVC06 0.217
25S M25 3/4" 1" 10.0 11.1 19.9 14.0 22.0 0.6 1.1 1.25 1.6 37.5 41.3 78.0 25SE2U1RA PVC09 0.345
25 M25 3/4" 1" 10.0 11.1 19.9 18.2 26.2 0.6 1.1 1.25 1.6 37.5 41.3 78.0 25E2U1RA PVC09 0.345
32 M32 1" 1 1/4" 10.0 17.0 26.2 23.7 33.9 0.6 1.2 1.6 2.0 46.0 50.6 78.0 32E2U1RA PVC11 0.484
40 M40 1 1/4" 1 1/2" 15.0 22.0 32.1 27.9 40.4 0.6 1.2 1.6 2.0 55.0 60.5 83.0 40E2U1RA PVC15 0.700
50S M50 1 1/2" 2" 15.0 29.5 38.1 35.2 46.7 0.6 1.5 2.0 2.5 60.0 66.0 78.0 50SE2U1RA PVC18 0.800
50 M50 2" 2 1/2" 15.0 35.6 44.0 40.4 53.1 0.8 1.5 2.0 2.5 70.0 77.0 81.0 50E2U1RA PVC21 0.830
63S M63 2" 2 1/2" 15.0 40.1 49.9 45.6 59.4 0.8 1.5 2.0 2.5 75.0 82.5 93.0 63SE2U1RA PVC23 1.415
63 M63 2 1/2" 3" 15.0 47.2 55.9 54.6 65.9 0.8 1.5 2.0 2.5 80.0 88.0 95.0 63E2U1RA PVC25 1.514
75S M75 2 1/2" 3" 15.0 52.8 61.9 59.0 72.1 0.8 1.5 2.0 2.5 89.0 97.9 103.0 75SE2U1RA PVC28 2.199
75 M75 3" 3 1/2" 15.0 59.1 67.9 66.7 78.5 0.8 1.5 2.5 3.0 99.0 108.9 110.0 75E2U1RA PVC30 2.770
90 M90 3" 3 1/2" 15.0 66.6 79.9 76.2 90.4 0.8 1.5 3.0 3.5 114.0 125.4 136.0 90E2U1RA PVC32 4.478
100 M100 4" - 15.0 76.0 90.9 86.1 101.5 0.8 1.5 3.15 4.0 123.0 135.3 145.0 100E2U1RA LSF33 4.700
115 M115 - - 15.0 86.0 97.9 101.5 110.3 0.8 1.5 3.15 4.0 133.4 146.7 160.0 115E2U1RA LSF34 5.300
130 M130 - - 15.0 97.0 114.9 114.2 123.3 0.8 1.5 3.15 4.0 146.1 160.7 185.0 130E2U1RA LSF35 5.900
Dimensions are displayed in millimetres unless otherwise stated

NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes. # Other thread forms are available.

NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes. # Other thread forms are available.

TECHNICAL DATA
GOST R Certificate Number POCC GB.06.H00187
GOST GGTN Permit PPC 00-40706
GOST K Certificate Number KZ 75000361 01 01 14761
RoK Permit For Use Number 19-02-UL-1957
Type E2U
Design Specification BS 6121:Part 1:1989, EN 50262:1999
Continuous Operating Temperature -60°C to +150°C
Ingress Protection Rating IP66
Cable Gland Material Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium
Seal Material CMP Formulated Thermoplastic Elastomer
Cable Type Lead Sheathed & Single Wire Armour (LC/SWA),
Lead Sheathed & Wire Braid Armour,
Lead Sheathed & Steel Tape Armour (LC/STA),
Lead Sheathed & Pliable Wire Armour (LC/PWA), Lead Sheathed & Strip Armour (LC/ASA)
Armour Clamping Reversible Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique CMP Inner Displacement Seal & Unique CMP "LRS" TM Outer Load Retention Seal
Sealing Area(s) Cable Inner Lead Sheath & Outer Sheath
Accessories Adaptor/Reducer, Earth Tag, Locknut, Serrated Washer, Entry Thread Seal, Shroud

Additional information

Close [-]

Video Coming Soon

CMP WP E2U_0311