E1W SOLO LSF Industrial Cable Gland Kit
CMP E1W SOLO type brass indoor and outdoor cable gland kit for use with all types of Single Wire Armour (SWA) cable, providing environmental seal on the cable Inner Bedding and Outer Sheaths.
All CMP Cable Glands are EMC Tested.
The cable gland also provides mechanical cable retention, and electrical continuity via armour wire termination. A detachable armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.
The CMP E1W SOLO range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168.
Other materials including Aluminium are also available in this standard design.
The cable gland kit includes CMP SOLO LSF (Low Smoke & Fume) Halogen Free Shrouds and Seals.
Cable Gland Selection Table
- View Metric Table
- View Imperial Table
| Cable Gland Size | Available Entry Threads "C" | Minimum Thread Length "E" | Cable Bedding Diameter "A" | Overall Cable Bedding Diameter "B" | Armour Range | Across Flats "D" | Across Corners "D" | Protrusion Length "F" | Ordering Reference (Brass Metric) | CMP SOLO LSF Shroud Reference | Cable Gland Weight (Kgs) | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | Option | Min | Max | Min | Max | Min | Max | Max | Max | |||||||
| Metric | NPT | NPT | ||||||||||||||
| 20S/16 | M20 | 1/2" | 3/4" | 10.0 | 3.1 | 8.6 | 6.1 | 13.2 | 0.8 | 1.0 | 24.0 | 26.4 | 63.0 | 20S16E1WLSF2RA | LSF04 | 0.163 |
| 20S | M20 | 1/2" | 3/4" | 10.0 | 6.1 | 11.6 | 9.5 | 15.9 | 0.8 | 1.25 | 24.0 | 26.4 | 63.0 | 20SE1WLSF2RA | LSF04 | 0.163 |
| 20 | M20 | 1/2" | 3/4" | 10.0 | 6.5 | 13.9 | 12.5 | 20.9 | 0.8 | 1.25 | 30.5 | 33.6 | 67.0 | 20E1WLSF2RA | LSF06 | 0.217 |
| 25 | M25 | 3/4" | 1" | 10.0 | 11.1 | 19.9 | 18.2 | 26.2 | 1.25 | 1.6 | 37.5 | 41.3 | 78.0 | 25E1WLSF2RA | LSF09 | 0.345 |
| 32 | M32 | 1" | 1 1/4" | 10.0 | 17.0 | 26.2 | 23.7 | 33.9 | 1.6 | 2.0 | 46.0 | 50.6 | 78.0 | 32E1WLSF2RA | LSF11 | 0.484 |
| 40 | M40 | 1 1/4" | 1 1/2" | 15.0 | 22.0 | 32.1 | 27.9 | 40.4 | 1.6 | 2.0 | 55.0 | 60.5 | 83.0 | 40E1WLSF2RA | LSF15 | 0.700 |
| 50S | M50 | 1 1/2" | 2" | 15.0 | 29.5 | 38.1 | 35.2 | 46.7 | 2.0 | 2.5 | 60.0 | 66.0 | 78.0 | 50SE1WLSF2RA | LSF18 | 0.800 |
| 50 | M50 | 2" | 2 1/2" | 15.0 | 35.6 | 44.0 | 40.4 | 53.1 | 2.0 | 2.5 | 70.0 | 77.0 | 81.0 | 50E1WLSF2RA | LSF21 | 0.830 |
| 63S | M63 | 2" | 2 1/2" | 15.0 | 40.1 | 49.9 | 45.6 | 59.4 | 2.0 | 2.5 | 75.0 | 82.5 | 93.0 | 63SE1WLSF2RA | LSF23 | 1.415 |
| 63 | M63 | 2 1/2" | 3" | 15.0 | 47.2 | 55.9 | 54.6 | 65.9 | 2.0 | 2.5 | 80.0 | 88.0 | 95.0 | 63E1WLSF2RA | LSF25 | 1.514 |
| 75S | M75 | 2 1/2" | 3" | 15.0 | 52.8 | 61.9 | 59.0 | 72.1 | 2.0 | 2.5 | 89.0 | 97.9 | 103.0 | 75SE1WLSF2RA | LSF28 | 2.199 |
| 75 | M75 | 3" | 3 1/2" | 15.0 | 59.1 | 67.9 | 66.7 | 78.5 | 2.5 | 3.0 | 99.0 | 108.9 | 110.0 | 75E1WLSF2RA | LSF30 | 2.770 |
| Dimensions are displayed in millimetres unless otherwise stated | ||||||||||||||||
NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes. # Other thread forms are available
NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes. # Other thread forms are available
| TECHNICAL DATA | |||||
|
|
|||||
| Lloyds Approval No. | 01/00171 |
| ABS Approval No. | 01-LD234401/1-PDA |
| GOST R Certificate Number | POCC GB.06.H00187 |
| GOST GGTN Permit | PPC 00-40706 |
| GOST K Certificate Number | KZ 75000361 01 01 14761 |
| RoK Permit For Use Number | 19-02-UL-1957 |
| Type | E1W SOLO-Kit |
| Design Specification | BS 6121:Part 1:1989, EN 50262:1999, IEC 62444:2010 |
| Continuous Operating Temperature | -60°C to +150°C |
| Ingress Protection Rating | IP66 |
| Cable Gland Material | Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium |
| Seal Material | CMP SOLO LSF |
| Cable Type | Single Wire Armour (SWA) |
| Armour Clamping | Detachable Armour Cone & AnyWay Universal Clamping Ring |
| Sealing Technique | CMP Inner Displacement Seal & Unique CMP "LRS" TM Outer Load Retention Seal |
| Sealing Area(s) | Cable Inner Bedding & Outer Cable Sheath |
| Gland Kits Available | Up to & including size 25 - 2 glands, 2 locknuts, 2 earth tags & 2 LSF shrouds. Size 32 & above - 1 gland, 1 locknut, 1 earth tag & 1 LSF shroud. |
Additional information
- Fitting Instructions
- Languages - Coming Soon
- Installation Video - Coming Soon
- Printer Friendly
