CXe Increased Safety Ex e Cable Gland

Brass

Click thumbnails for alternate materials

logos

CXe Increased Safety Ex e Cable Gland

CMP Type CXe Increased Safety (Type 'e') cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Braided, Pliable Wire Armour (PWA), Strip Armour and Steel Tape Armour (STA) cable providing an environmental seal on the cable outer sheath. The cable gland being suitable for armoured cables, provides mechanical cable retention and electrical continuity via armour wire termination.

All CMP Cable Glands are EMC Tested.

Click for more details

A detachable armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re-connected with the same consummate ease. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.

The CMP CXe Cable Gland is suitable for use with Increased Safety Type e and Flameproof Type d enclosures that are equipped with a secondary Increased Safety Type e terminal enclosure (i.e. Ex de) provided always that no source of ignition prevails and the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.

Cable Gland Selection Table

  • View Metric Table
  • View Imperial Table
Cable Gland Size Standard Metric Entry Threads "C" Minimum Thread Length "E" Cable Bedding Diameter "A" Overall Cable Diameter "B" Tape Armour Range Across Flats "D" Across Corners "D" Protrusion Length "F" Ordering Reference
(Brass Metric)
Shroud Reference Cable Gland Weight (Kgs)
Max Min Max Min Max Max Max
20S/16 M20 15.0 8.7 6.1 11.5 0.15 0.5 24.0 26.4 21.0 20S16CXe1RA PVC04 0.054
20S M20 15.0 11.7 9.5 15.9 0.15 0.5 24.0 26.4 21.0 20SCXe1RA PVC04 0.054
20 M20 15.0 14.0 12.5 20.9 0.2 0.5 30.5 33.6 24.0 20CXe1RA PVC06 0.059
25S M25 15.0 20.0 14.0 22.0 0.2 0.6 37.5 41.3 26.0 25SCXe1RA PVC09 0.112
25 M25 15.0 20.0 18.2 26.2 0.2 0.6 37.5 41.3 26.0 25CXe1RA PVC09 0.128
32 M32 15.0 26.3 23.7 33.9 0.2 0.6 46.0 50.6 27.0 32CXe1RA PVC11 0.128
40 M40 15.0 32.2 27.9 40.4 0.2 0.8 55.0 60.5 28.0 40CXe1RA PVC15 0.168
50S M50 15.0 38.2 35.2 46.7 0.2 0.8 60.0 66.0 29.0 50SCXe1RA PVC18 0.224
50 M50 15.0 44.1 40.4 53.1 0.3 0.8 70.0 77.0 30.0 50CXe1RA PVC21 0.231
63S M63 15.0 50.0 45.6 59.4 0.3 0.8 75.0 82.5 30.0 63SCXe1RA PVC23 0.360
63 M63 15.0 56.0 54.6 65.9 0.3 0.8 80.0 88.0 30.0 63CXe1RA PVC25 0.344
75S M75 15.0 62.0 59.0 72.1 0.3 0.8 89.0 97.9 32.0 75SCXe1RA PVC28 0.466
75 M75 15.0 68.0 66.7 78.5 0.3 0.8 99.0 108.9 32.0 75CXe1RA PVC30 0.395
90 M90 15.0 80.0 76.2 90.4 0.4 0.8 114.0 125.4 44.0 90CXe1RA PVC32 1.346
100 M100 15.0 91.0 86.1 101.5 0.4 0.8 123.0 135.3 48.0 100CXe1RA LSF33 1.575
115 M115 15.0 98.0 101.5 110.3 0.4 0.8 133.4 146.7 55.0 115CXe1RA LSF34 2.322
130 M130 15.0 115.0 114.2 123.3 0.4 0.8 146.1 160.7 62.0 130CXe1RA LSF35 3.400
Dimensions are displayed in Millimetres

NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes. #Other materials and finishes are available. IEC Ex and ATEX hazardous area certification marking included as standard. Please consult CMP for any other requirements.

Note:NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes. #Other materials and finishes are available. IEC Ex and ATEX hazardous area certification marking included as standard. Please consult CMP for any other requirements.

TECHNICAL DATA
GOST R Certificate Number POCC GB.HO06.B00207
GOST R Code of Protection Category Ex e II / DIP A21
GOST R Compliance Standards ГOCT P 52350.0-2005, ГOCT P 52350.1-2005,
ГOCT P 52350.7-2005, ГOCT MЭK 61241-1-1-99
GOST GGTN Permit PPC 00-40706
GOST K Certificate Number KZ 75000361 01 01 14761
RoK Permit For Use Number 19-02-UL-1957
Lloyds Approval No. 01/00171
DNV Approval No. E-10496
ABS Approval No. 01-LD234401B/1-PDA
INMETRO Approval Certificate No. MC-AEX-7617-X
INMETRO Code of Protection Category BR - Ex e II / IP66W
INMETRO Compliance Standards IEC 60079-0/00, IEC 60079-7/01, NBE IEC 60529/05
NEPSI Certificate Number GYJ081070
NEPSI Code of Protection Category Ex e II, DIP A21 TA
NEPSI Compliance Standards GB3836.1/2/3-2000, GB3836.8-2003, GB12476.1-2000
RETIE Approval Number 03866
Type CXe
Design Specification BS 6121:Part 1:1989, EN 50262:1999
ATEX Certification Detail SIRA06ATEX1097X, SIRA07ATEX4326X
ATEX Code of Protection Category ATEX ATEX Approved II 2 GD, Ex d IIC, Ex e II, Ex tD A21 IP66
ATEX Compliance Standards EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15:2003, IEC 61241-0, EN 61241-1
IEC Ex Certification Detail IECEx SIR 06.0042X
IEC Ex Code of Protection Category Ex e II, Ex tD A21 IP66
IEC Ex Compliance Standards IEC 60079-0, IEC 60079-7, IEC 61241-0, IEC 61241-1
Continuous Operating Temperature -60°C to +130°C
Ingress Protection Rating IP66
Cable Gland Material Brass, Electroless Nickel Plated Brass, Aluminium, Stainless Steel
Seal Material CMP SOLO LSF Thermoplastic Elastomer
Cable Type Wire Braid Armour (e.g. SWB), Screened Flexible Wire Braid (e.g. CY / SY), Pliable Wire Armour (PWA), Steel Tape Armour (STA), Strip Armour (e.g. ASA)
Armour Clamping Detachable Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique Unique CMP "LRS" TM Outer Seal (Load Retention Seal)
Sealing Area(s) Cable Outer Sheath
Accessories Adaptor/Reducer, Earth Tag, Locknut, Serrated Washer, Entry Thread Seal, Shroud

Additional information

Close [-]

Video Coming Soon

CMP WP CXe_0311