CX Industrial Cable Gland

Brass

Click thumbnails for alternate materials

CX Industrial Cable Gland

CMP CX type brass indoor and outdoor cable gland for use with all types of Wire Braid Armour, Strip Armour, Pliable Wire Armour & Steel Tape Armour (STA) cable, providing environmental seal on the cable outer sheath. The cable gland also provides mechanical cable retention and electrical continuity via armour wire termination.

All CMP Cable Glands are EMC Tested.

Click for more details

A detachable armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.

The CMP CX range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design.

Cable Gland Selection Table

  • View Metric Table
  • View Imperial Table
Cable Gland Size Entry Thread "C" Minimum Thread Length "E" Cable Bedding Diameter "A" Overall Cable Diameter "B" Tape Armour Range Across Flats "D" Across Corners "D" Protrusion Length "F" Ordering Reference (Brass Metric) Shroud Ref * Cable Gland Weight (Kgs)
Max Min Max Min Max Max Max
20S/16 M20 10.0 8.7 6.1 11.5 0.15 0.5 24.0 26.4 43.0 20S16CX1RA PVC04 0.118
20S M20 10.0 11.7 9.5 15.9 0.15 0.5 24.0 26.4 43.0 20SCX1RA PVC04 0.118
20 M20 10.0 14.0 12.5 20.9 0.2 0.5 30.5 33.6 50.0 20CX1RA PVC06 0.159
25S M25 10.0 20.0 14.0 22.0 0.2 0.6 36.0 39.6 55.0 25SCX1RA PVC09 0.228
25 M25 10.0 20.0 18.2 26.2 0.2 0.6 36.0 39.6 55.0 25CX1RA PVC09 0.228
32 M32 10.0 26.3 23.7 33.9 0.2 0.6 46.0 50.6 55.0 32CX1RA PVC11 0.362
40 M40 15.0 32.2 27.9 40.4 0.2 0.8 55.0 60.5 55.0 40CX1RA PVC15 0.520
50S M50 15.0 38.2 35.2 46.7 0.2 0.8 60.0 66.0 56.0 50SCX1RA PVC18 0.579
50 M50 15.0 44.1 40.4 53.1 0.3 0.8 70.1 77.1 70.0 50CX1RA PVC21 0.601
63S M63 15.0 50.0 45.6 59.4 0.3 0.8 75.0 82.5 70.0 63SCX1RA PVC23 1.054
63 M63 15.0 56.0 54.6 65.9 0.3 0.8 80.0 88.0 80.0 63CX1RA PVC25 1.200
75S M75 15.0 62.0 59.0 72.1 0.3 0.8 90.0 99.0 81.1 75SCX1RA PVC28 1.779
75 M75 15.0 68.0 66.7 78.5 0.3 0.8 100.0 110.0 96.0 75CX1RA PVC30 2.370
90 M90 15.0 80.0 76.2 90.4 0.4 0.8 114.0 125.4 120.0 90CX1RA PVC32 3.515
100 M100 15.0 91.0 86.1 101.5 0.4 0.8 123.0 132.8 140.0 100CX1RA LSF33 4.100
115 M115 15.0 98.0 101.5 110.3 0.4 0.8 133.4 146.7 160.0 115CX1RA LSF34 4.600
130 M130 15.0 115.0 114.3 123.3 0.4 0.8 146.1 160.7 169.0 130CX1RA LSF35 5.200
Dimensions are displayed in millimetres unless otherwise stated

NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes.

NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes.

TECHNICAL DATA
GOST R Certificate Number POCC GB.06.H00187
GOST GGTN Permit PPC 00-40706
GOST K Certificate Number KZ 75000361 01 01 14761
RoK Permit For Use Number 19-02-UL-1957
Lloyds Approval No. 01/00171
ABS Approval No. 01-LD234401/1-PDA
Type CX
Design Specification BS 6121:Part 1:1989, EN 50262:1999
Continuous Operating Temperature -60°C to +150°C
Ingress Protection Rating IP66
Cable Gland Material Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium
Seal Material CMP Formulated Thermoplastic Elastomer
Cable Type Wire Braid Armour, Screened Flexible Wire Braid (e.g. CY / SY), Pliable Wire Armour (PWA), Steel Tape Armour (STA)
Armour Clamping Detachable Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique Unique CMP "LRS" TM Outer Seal (Load Retention Seal)
Sealing Area(s) Cable Outer Sheath
Accessories Adaptor/Reducer, Earth Tag, Entry Thread Seal, Locknut, Serrated Washer, Shroud

Close [-]

Video Coming Soon

CMP WP CX_0311