CW SOLO LSF Industrial Cable Gland Kit
CMP CW SOLO type brass indoor and outdoor cable gland kit for use with all types of Single Wire Armour (SWA) cable, providing environmental seal on the cable outer sheath.
All CMP Cable Glands are EMC Tested.
The cable gland also provides mechanical cable retention, and electrical continuity via armour wire termination. A detachable armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc. This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.
The CMP CW SOLO range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262:1999, and is produced from Brass grade CUZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design.
The cable gland kit includes CMP SOLO LSF (Low Smoke & Fume) Halogen Free Shrouds and Seals.
Cable Gland Selection Table
- View Metric Table
- View Imperial Table
| Cable Gland Size | Entry Thread "C" | Minimum Thread Length "E" | Cable Bedding Diameter "A" | Overall Cable Diameter "B" | Armour Range + | Across Flats "D" | Across Corners "D" | Protrusion Length "F" | Ordering Reference (Brass Metric) | CMP SOLO LSF Shroud Reference | Cable Gland Weight (Kgs) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max | Min | Max | Min | Max | Max | Max | |||||||
| 20S/16 | M20 | 10.0 | 8.6 | 6.1 | 13.2 | 0.8 | 1.0 | 24.0 | 26.4 | 43.0 | 20S16CWLSF2RA | LSF04 | 0.118 |
| 20S | M20 | 10.0 | 11.6 | 9.5 | 15.9 | 0.8 | 1.25 | 24.0 | 26.4 | 43.0 | 20SCWLSF2RA | LSF04 | 0.118 |
| 20 | M20 | 10.0 | 13.9 | 12.5 | 20.9 | 0.8 | 1.25 | 30.5 | 33.6 | 50.0 | 20CWLSF2RA | LSF06 | 0.159 |
| 25 | M25 | 10.0 | 19.9 | 18.2 | 26.2 | 1.25 | 1.6 | 36.0 | 39.6 | 55.0 | 25CWLSF2RA | LSF09 | 0.228 |
| 32 | M32 | 10.0 | 26.2 | 23.7 | 33.9 | 1.6 | 2.0 | 46.0 | 50.6 | 58.0 | 32CWLSF2RA | LSF11 | 0.362 |
| 40 | M40 | 15.0 | 32.1 | 27.9 | 40.4 | 1.6 | 2.0 | 55.0 | 60.5 | 55.0 | 40CWLSF2RA | LSF15 | 0.520 |
| 50S | M50 | 15.0 | 38.1 | 35.2 | 46.7 | 2.0 | 2.5 | 60.0 | 66.0 | 56.0 | 50SCWLSF2RA | LSF18 | 0.579 |
| 50 | M50 | 15.0 | 44.0 | 40.4 | 53.1 | 2.0 | 2.5 | 70.1 | 77.1 | 70.0 | 50CWLSF2RA | LSF21 | 0.601 |
| 63S | M63 | 15.0 | 49.9 | 45.6 | 59.4 | 2.0 | 2.5 | 75.0 | 82.5 | 70.0 | 63SCWLSF2RA | LSF23 | 1.054 |
| 63 | M63 | 15.0 | 55.9 | 54.6 | 65.9 | 2.0 | 2.5 | 80.0 | 88.0 | 80.0 | 63CWLSF2RA | LSF25 | 1.200 |
| 75S | M75 | 15.0 | 61.9 | 59.0 | 72.1 | 2.0 | 2.5 | 90.0 | 99.0 | 81.1 | 75SCWLSF2RA | LSF28 | 1.779 |
| 75 | M75 | 15.0 | 67.9 | 66.7 | 78.5 | 2.5 | 3.0 | 100.0 | 110.0 | 96.0 | 75CWLSF2RA | LSF30 | 2.370 |
| Dimensions are displayed in millimetres unless otherwise stated | |||||||||||||
| Cable Gland Size | Entry Thread "C" | Minimum Thread Length "E" | Cable Bedding Diameter "A" | Overall Cable Diameter "B" | Armour Range + | Across Flats "D" | Across Corners "D" | Protrusion Length "F" | Ordering Reference (Brass Metric) | CMP SOLO LSF Shroud Reference | Cable Gland Weight (Ozs) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max | Min | Max | Min | Max | Max | Max | |||||||
| 20S/16 | M20 | 0.394 | 0.343 | 0.240 | 0.453 | 0.035 | 0.039 | 0.945 | 1.020 | 1.693 | 20S16CWLSF2RA | LSF04 | 4.16 |
| 20S | M20 | 0.394 | 0.461 | 0.374 | 0.626 | 0.035 | 0.049 | 0.945 | 1.020 | 1.693 | 20SCWLSF2RA | LSF04 | 4.16 |
| 20 | M20 | 0.394 | 0.551 | 0.492 | 0.823 | 0.035 | 0.049 | 1.201 | 1.295 | 1.969 | 20CWLSF2RA | LSF06 | 5.61 |
| 25 | M25 | 0.394 | 0.787 | 0.717 | 1.031 | 0.049 | 0.063 | 1.417 | 1.531 | 2.165 | 25CWLSF2RA | LSF09 | 8.04 |
| 32 | M32 | 0.394 | 1.035 | 0.933 | 1.335 | 0.063 | 0.079 | 1.811 | 1.957 | 2.283 | 32CWLSF2RA | LSF11 | 12.77 |
| 40 | M40 | 0.591 | 1.268 | 1.098 | 1.591 | 0.063 | 0.079 | 2.165 | 2.339 | 2.165 | 40CWLSF2RA | LSF15 | 18.34 |
| 50S | M50 | 0.591 | 1.504 | 1.386 | 1.839 | 0.079 | 0.098 | 2.362 | 2.551 | 2.205 | 50SCWLSF2RA | LSF18 | 20.42 |
| 50 | M50 | 0.591 | 1.736 | 1.591 | 2.091 | 0.079 | 0.098 | 2.760 | 2.980 | 2.756 | 50CWLSF2RA | LSF21 | 21.20 |
| 63S | M63 | 0.591 | 1.969 | 1.795 | 2.339 | 0.079 | 0.098 | 2.953 | 3.189 | 2.756 | 63SCWLSF2RA | LSF23 | 37.18 |
| 63 | M63 | 0.591 | 2.205 | 2.150 | 2.594 | 0.079 | 0.098 | 3.150 | 3.402 | 3.150 | 63CWLSF2RA | LSF25 | 42.33 |
| 75S | M75 | 0.591 | 2.441 | 2.323 | 2.839 | 0.079 | 0.098 | 3.543 | 3.827 | 3.193 | 75SCWLSF2RA | LSF28 | 62.75 |
| 75 | M75 | 0.591 | 2.677 | 2.626 | 3.091 | 0.098 | 0.118 | 3.937 | 4.252 | 3.780 | 75CWLSF2RA | LSF30 | 83.60 |
| Dimensions are displayed in inches unless otherwise stated | |||||||||||||
| TECHNICAL DATA | |||||
|
|
|||||
| ABS Approval No. | 01-LD234401/1-PDA |
| Lloyds Approval No. | 01/00171 |
| GOST R Certificate Number | POCC GB.06.H00187 |
| GOST GGTN Permit | PPC 00-40706 |
| GOST K Certificate Number | KZ 75000361 01 01 14761 |
| RoK Permit For Use Number | 19-02-UL-1957 |
| Type | CW SOLO |
| Design Specification | BS 6121 :Part 1:2005, EN 50262:1999, IEC 62444:2010 |
| Continuous Operating Temperature | -60°C to +150°C |
| Ingress Protection Rating | IP66 |
| Ingress Protection Document | 5046 C549H |
| Deluge Protection Compliance | DTS01 : 91 |
| Deluge Protection Document | 5046 C549H-D |
| Cable Gland Material | Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium |
| Seal Material | CMP Formulated Thermoplastic Elastomer |
| Cable Type | Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Steel Tape Armour (STA), Aluminium Strip Armour (ASA), Wire Braid Armour, Screened Flexible Wire Braid (e.g. CY / SY), Pliable Wire Armour (PWA) |
| Armour Clamping | Reversible Armour Cone & AnyWay Universal Clamping Ring |
| Sealing Technique | Unique CMP "LRS" TM Outer Seal (Load Retention Seal) |
| Sealing Area(s) | Cable Outer Sheath |
| Accessories | Adaptor/Reducer, Earth Tag, Locknut, Serrated Washer, Entry Thread Seal, Shroud |
Additional information
