Product Finder

Product Finder

Our Product Finder tool allows you to find the perfect product for your requirements.

SapphireHeavy Duty Stainless Steel Hinged Cable Cleat

The CMP Products Sapphire cable cleat range consists of metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ IEC 61914:2009. The range has been designed and tested for high short circuit conditions on cables held in single, parallel / flat formation, to ensure the securing and retention of cables without damage.

The Sapphire cable cleat is available for single parallel formation and for diameters of 26 to 150mm in 12 sizes and is fabricated from 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest of environments.

With one M12 and two M10 fixing clearance holes within its base, the Sapphire range allows versatility to the installer during installation, and is designed to enable the product to be secured to a variety of mounting surfaces. The cable cleat hinge opens fully, allowing the cables to be easily placed within the cable cleat, to aid the installer before closing and securing via the mouth piece bolt.

The Sapphire cable cleats come with liners as standard, helping to restrain the cables within vertical applications, providing a layer of protection between the cable sheath and the cable cleat during normal operation, where thermal elongation of cable occurs, protecting the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The liners also assist in the extra protection of cables in the event of short circuit fault conditions. The standard liners supplied are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free.

  • Third party certification to IEC 61914:2009
  • 316L stainless steel
  • 26 to 150mm in 12 sizes for single / parallel formation
  • Operating temperature -50°C to +60°C
  • Standard liners which are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free
  • Combined single (M12) and two bolt (M10) fixing design
Short Circuit Testing to IEC 61914:2009 - Clause 9.5
Multicore FormationParallel Formation
One short circuit (6.4.3) 600mm fixed cleat centresTwo short circuits (6.4.4) 600mm fixed cleat centresOne short circuit (6.4.3) 600mm fixed cleat centres 105mm cable centresTwo short circuits (6.4.4) 600mm fixed cleat centres 105mm cable centres
0.1 sec0.1 sec0.1 sec0.1 sec
105kA Peak105.4kA Peak110kA Peak109kA Peak
50.0kA RMS50.0kA RMS50.0kA RMS50.0kA RMS
Type 6.1.3 Composite SHDSS - Single Heavy Duty Stainless Steel
Design Specification IEC 61914:2009
Temperature for permanent application -50°C to +60°C
IEC 61914:2009 clause 6.2
Needle Flame Test Pass - 120 second flame application time
IEC 61914:2009 clause 10.0, 10.1, IEC 60695-11-5
Lateral Load Test 3.5kN - 14.5kN, IEC 61914:2009 clause 9.3
Axial Load Test 0.2kN - 0.9kN, IEC 61914:2009 clause 9.4
Impact Resistance Pass - Very heavy
IEC 61914:2009 clause 6.3, 6.3.5, 9.2
Material 316L Stainless Steel with Standard Liners
Standard liners are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free
Introducing the Sentinel

Product Selection Table

Click here to view Technical Illustration

Technical Illustration

Part No.Cable Ø range take (in.)Dimensions (in.)Weight (oz)
WHDPFixing Hole Ø
D1D2
SHDSS0260321.024 - 1.2603.7403.4652.1260.9842 x M101 x M1214.18
SHDSS0320381.260 - 1.4963.7803.6612.1260.9842 x M101 x M1215.20
SHDSS0380461.496 - 1.8113.9373.9372.1260.9842 x M101 x M1215.73
SHDSS0460511.811 - 2.0084.0944.0552.1260.9842 x M101 x M1216.08
SHDSS0510582.008 - 2.2834.2524.2132.1260.9842 x M101 x M1216.65
SHDSS0580702.283 - 2.7565.0794.6852.1261.9692 x M101 x M1219.54
SHDSS0700832.756 - 3.2685.3944.7242.1261.9692 x M101 x M1220.49
SHDSS0830973.268 - 3.8196.1815.3942.1262.9532 x M101 x M1223.46
SHDSS0961093.780 - 4.2916.4965.2362.1262.9532 x M101 x M1224.27
SHDSS1061204.173 - 4.7246.6935.5912.1262.9532 x M101 x M1225.15
SHDSS1201354.724 - 5.3157.7566.1812.1262.9532 x M101 x M1228.71
SHDSS1351505.315 - 5.9068.0716.7722.1262.9532 x M101 x M1229.88
Part No.Cable Ø range take (mm)Dimensions mmWeight (g)
WHDPFixing Hole Ø
D1D2
SHDSS02603226-3295.088.054.025.02 x M101 x M12402
SHDSS03203832-3896.093.054.025.02 x M101 x M12431
SHDSS03804638-46100.0100.054.025.02 x M101 x M12446
SHDSS04605146-51104.0103.054.025.02 x M101 x M12456
SHDSS05105851-58108.0107.054.025.02 x M101 x M12472
SHDSS05807058-70129.0119.054.050.02 x M101 x M12554
SHDSS07008370-83137.0120.054.050.02 x M101 x M12581
SHDSS08309783-97157.0137.054.075.02 x M101 x M12665
SHDSS09610996-109165.0133.054.075.02 x M101 x M12688
SHDSS106120106-120170.0142.054.075.02 x M101 x M12713
SHDSS120135120-135197.0157.054.075.02 x M101 x M12814
SHDSS135150135-150205.0172.054.075.02 x M101 x M12847

Newsletter

Sign up to our newsletter