Product Finder

Product Finder

Our Product Finder tool allows you to find the perfect product for your requirements.

HuronAluminium Hinged Cable Cleat

CMP Huron cable cleats are metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ IEC 61914:2009 to ensure the securing and retention of cables, without sustaining damage to the cable(s).

The Huron range of cable cleats are fabricated from 5000 series aluminium and are available in 23 sizes to suit cable diameters 19mm to 128mm.

The Huron cable cleat has three M10 fixing clearance holes within one base, allowing versatility to the installer during installation to use either one M10 bolt or two M10 bolts, and is designed to enable the product to be secured to a variety of mounting surfaces. The Huron cable cleats hinge opens fully allowing the cables to be easily placed within the cable cleat to aid the installer before closing and securing via the mouth piece bolt.

The Huron cable cleats come with Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free (LSF) liners as standard, helping to restrain the cable(s) within vertical applications, This provides a layer of protection between the cable sheath and the cable cleat during normal operation, where thermal elongation of cables occur, protecting the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free liners also assist in the extra protection of cable(s) in the event of short circuit fault conditions.

  • Third party certification to IEC 61914:2009
  • 5000 series aluminium
  • 19 – 128mm in 23 sizes for trefoil formation / application
  • Short circuit rating of 84kA peak fault
  • Operating temperature -50°C to +60°C
  • Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free as standard
  • Combined single (M10) or two bolt (M10) fixing design
Short Circuit Testing to IEC 61914:2009 - Clause 9.5
Trefoil Formation
One short circuit (6.4.3) 300mm fixed cleat centresTwo short circuits (6.4.4) 300mm fixed cleat centres
0.1 sec0.1 sec
84kA Peak84kA Peak
40.5kA RMS40.5kA RMS
300mm CAT 1 Huron LDAL (0.1 sec)
Cable OD (mm)Peak kA
3684.0
3886.3
4391.8
59107.5
65112.9
Type 6.1.3 Composite LDAL - Aluminium
Design Specification IEC 61914:2009
Temperature for permanent application -50°C to +60°C
IEC 61914:2009 clause 6.2
Needle Flame Test Pass - 120 second flame application time
IEC 61914:2009 clause 10.0, 10.1, IEC 60695-11-5
Lateral Load Test Refer to CMP Products, IEC 61914:2009 clause 9.3
Axial Load Test Refer to CMP Products, IEC 61914:2009 clause 9.4
Impact Resistance Pass - Very heavy
IEC 61914:2009 clause 6.3, 6.3.5, 9.2
Material 5000 Series Aluminium & Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free Liners
Introducing the Sentinel

Product Selection Table

Click here to view Technical Illustration

Technical Illustration

Huron Part No.Cable Ø Range Take (in.)Dimensions (in.)Weight (oz)
WHDPFixing Hole Ø
D1D2
LDAL0190230.748 - 0.9063.9373.4252.1260.9842 x M101 x M107.51
LDAL0230280.906 - 1.1024.0943.4652.1260.9842 x M101 x M108.29
LDAL0270321.063 - 1.2604.1733.8192.1260.9842 x M101 x M108.54
LDAL0300351.181 - 1.3784.2524.0552.1260.9842 x M101 x M108.75
LDAL0330381.299 - 1.4964.3314.2132.1260.9842 x M101 x M108.85
LDAL0360421.417 - 1.6545.1974.2522.1261.9692 x M101 x M1010.41
LDAL0400461.575 - 1.8115.2764.4492.1261.9692 x M101 x M1010.65
LDAL0440501.732 - 1.969 5.3544.7642.1261.9692 x M101 x M1010.90
LDAL0480551.890 - 2.1655.4335.0002.1261.9692 x M101 x M1011.29
LDAL0510582.008 - 2.2835.5125.1182.1261.9692 x M101 x M1011.50
LDAL0550622.165 - 2.4416.1815.4332.1262.9532 x M101 x M1012.80
LDAL0590662.323 - 2.5986.1815.7092.1262.9532 x M101 x M1013.09
LDAL0630702.480 - 2.7566.2995.9842.1262.9532 x M101 x M1013.33
LDAL0670742.638 - 2.9136.4176.2992.1262.9532 x M101 x M1013.62
LDAL0710782.795 - 3.0716.6146.5752.1262.9532 x M101 x M1013.93
LDAL0740822.913 - 3.2287.4806.8902.1262.9532 x M101 x M1015.66
LDAL0770853.031 - 3.3467.5597.0872.1262.9532 x M101 x M1015.87
LDAL0820883.228 - 3.4657.5987.3232.1262.9532 x M101 x M1016.05
LDAL0880963.465 - 3.7807.9537.9132.1262.9532 x M101 x M1016.65
LDAL0961033.780 - 4.0558.4258.4652.1262.9532 x M101 x M1017.14
LDAL1031114.055 - 4.3709.3319.0162.1262.9532 x M101 x M1019.22
LDAL1111194.370 - 4.6859.7649.6062.1262.9532 x M101 x M1019.79
LDAL1191284.685 - 5.03910.43310.2362.1262.9532 x M101 x M1020.85
Huron Part No.Cable Ø Range Take (mm)Dimensions (mm)Weight (g)
WHDPFixing Hole Ø
D1D2
LDAL01902319-23100.087.054.025.02 x M101 x M10213
LDAL02302823-28104.088.054.025.02 x M101 x M10235
LDAL02703227-32106.097.054.025.02 x M101 x M10242
LDAL03003530-35108.0103.054.025.02 x M101 x M10248
LDAL03303833-38110.0107.054.025.02 x M101 x M10251
LDAL03604236-42132.0108.054.050.02 x M101 x M10295
LDAL04004640-46134.0113.054.050.02 x M101 x M10302
LDAL04405044-50136.0121.054.050.02 x M101 x M10309
LDAL04805548-55138.0127.054.050.02 x M101 x M10320
LDAL05105851-58140.0130.054.050.02 x M101 x M10326
LDAL05506255-62157.0138.054.075.02 x M101 x M10363
LDAL05906659-66157.0145.054.075.02 x M101 x M10371
LDAL06307063-70160.0152.054.075.02 x M101 x M10378
LDAL06707467-74163.0160.054.075.02 x M101 x M10386
LDAL07107871-78168.0167.054.075.02 x M101 x M10395
LDAL07408274-82190.0175.054.075.02 x M101 x M10444
LDAL07708577-85192.0180.054.075.02 x M101 x M10450
LDAL08208882-88193.0186.054.075.02 x M101 x M10455
LDAL08809688-96202.0201.054.075.02 x M101 x M10472
LDAL09610396-103214.0215.054.075.02 x M101 x M10486
LDAL103111103-111237.0229.054.075.02 x M101 x M10545
LDAL111119111-119248.0244.054.075.02 x M101 x M10561
LDAL119128119-128265.0260.054.075.02 x M101 x M10591

Newsletter

Sign up to our newsletter