Product Finder

Product Finder

Our Product Finder tool allows you to find the perfect product for your requirements.

Cyclone IIHeavy Duty Cable Cleat with Stainless Steel Base

The CMP Products Cyclone II Strap cable cleats are metallic cable cleats consisting of a fabricated 316L stainless steel base and a stainless steel strap which have been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ IEC 61914:2009. The Cyclone II Strap cable cleats ensure the retention and securing of cables, whilst preventing damage to the cable when in normal operation or in the event a short circuit fault condition.

The Cyclone II Strap cable cleat is designed and tested to restrain cables securely during moderate short circuit forces. Straps are designed to wrap around the cables twice.

The cable cleats allow a wide range of applications including miscellaneous formations. They have an exceptional overlapping range and give the end user more flexibility when compared to more rigid cable cleats on the market. Each cable cleat is capable of securing various cable formations, such as single cable (multicore) or single cable in parallel formation, trefoil formation, and quad formation. Suitable for single cable applications diameters from 36mm to 118mm in 8 sizes, in trefoil formation from diameters of 24mm to 145mm in 15 sizes and quad formation from 21mm to 68mm in 8 sizes.

The Cyclone II bases are manufactured from 316L stainless steel, giving the cable cleats high creep strength and excellent corrosion resistance. The Cyclone straps are manufactured in 316L stainless steel providing excellent corrosion resistance, and the tensioned straps act as a coil during short circuit conditions to restrain the cable. The Cyclone strap wraps around the angled Cyclone II stainless steel base ensuring the cables are always kept central, the strap is fastened to a stainless steel pin with a hexagon shaped head at one end allowing fast, easy installation via the use of a ratchet, power tool or other suitable mechanical device.

The Cyclone II Strap cable cleats have one M12 and two M10 fixing clearance holes within each base, allowing versatile installation, and enabling the product to be secured to a variety of mounting surfaces. Due to the design of the Cyclone, the cables do not need to be lifted and placed in to the cable cleat, instead the cables are placed on to the bases and the Cyclone straps then wrap around the cables securing them to the mounting surface of the base.

The Cyclone II cable cleats and Cyclone intermediate straps come with Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free liners as standard, helping to restrain the cables within vertical applications, providing a layer of protection between the cable sheath and the Cyclone stainless steel strap and base during normal operation where thermal elongation of cables occurs. The liners also prevent the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications, and protect the cable during short circuit conditions.

The Cyclone Straps are designed to be used as an intermediate restraint (where applicable) between two Cyclone cable cleats to bind cables together giving a cost effective, easy application fixing system. Using the Cyclone II Strap cable cleat and the Cyclone Intermediate Restraints alternatively will dramatically reduce installation time and cost, when compared to alternative cable cleat only solutions.

  • Third party certification to IEC 61914:2009
  • 316L stainless steel base with stainless steel strap
  • 24 – 145mm in 15 sizes for trefoil formation / application
  • 36 – 118mm in 8 sizes for multicore cables or single core parallel formations
  • 21 – 68mm in 8 sizes for quad formations
  • Short circuit rating of 151kA peak fault
  • Operating temperature -50°C to +60°C
  • Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free liners as standard
  • Combined single (M12) and two bolt (M10) base fixing design
Cyclone II Short Circuit Testing to IEC 61914:2009 - Clause 9.5
Trefoil Formation
One short circuit (6.4.3)One short circuit (6.4.3) w/ Cyclone strapTwo short circuits (6.4.4)Two short circuits (6.4.4) w/ Cyclone strap
fixed cleat centres 300mm300mm600mm1200mm600mm600mm600mm
0.1 sec1 sec1 sec0.1 sec0.1 sec1 sec0.1 sec
151kA Peak80kA Peak75kA Peak125kA Peak120kA Peak70kA Peak114kA Peak
68.6kA RMS35.6kA RMS34.8kA RMS56.8kA RMS54.5kA RMS32.8kA RMS51.8kA RMS
300mm CAT 1 Cyclone II (0.1 sec)
Cable OD (mm)Peak kA
36151.0
38155.1
43165.0
59193.3
65202.9
Type 6.1.3 Composite Strap Cable Cleat - 2 Loop Cyclone II / 3 Loop Cyclone III
Design Specification IEC 61914:2009
Temperature for permanent application -50 to +60°C
IEC 61914:2009 clause / part 6.2
Needle Flame Test Pass - 120 second flame application time, IEC 61914:2009 clause 10.0, 10.1, IEC 60695-11-5
Lateral Load Test Single - 5.5kN - 20kN, IEC 61914:2009 clause 9.3
Trefoil - Refer to CMP Products, IEC 61914:2009 clause 9.3
Axial Load Test IEC 61914:2009 clause 9.4, Single - 0.4kN - 0.6kN
IEC 61914:2009 clause 9.4, Trefoil - 0.4kN
Impact Resistance Very Heavy, IEC 61914:2009 clause 6.3, 6.3.5, 9.2
Material 316L Stainless Steel and Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free Liners
Introducing the Sentinel

Product Selection Table

Cyclone II Part No.Cable Ø Range Take (in.)Dimensions (in.)Weight
(oz)
SingleTrefoilQuadWHDPFixing Hole Ø
D1D2
2CYC0240341.417 - 1.9690.945 - 1.339 0.827 - 1.142 4.2523.7803.5043.1502 x M101 x M1218.31
2CYC0300411.772 - 2.362 1.181 - 1.614 1.024 - 1.378 4.2524.2913.5043.1502 x M101 x M1218.98
2CYC0370472.165 - 2.717 1.457 - 1.850 1.260 - 1.575 5.0394.7243.5043.9372 x M101 x M1221.59
2CYC0430542.520 - 3.150 1.693 - 2.126 1.457 - 1.811 5.0395.2763.5043.9372 x M101 x M1222.36
2CYC0500602.953 - 3.465 1.969 - 2.362 1.693 - 2.008 5.8275.7093.5044.7242 x M101 x M1225.71
2CYC0560673.268 - 3.898 2.205 - 2.638 1.929 - 2.244 5.8276.2203.5044.7242 x M101 x M1226.35
2CYC0630733.701 - 4.252 2.480 - 2.874 2.165 - 2.441 6.6146.6933.5045.5122 x M101 x M1229.00
2CYC0690804.055 - 4.646 2.717 - 3.150 2.362 - 2.677 6.6147.2053.5045.5122 x M101 x M1229.67
2CYC0720852.835 - 3.346 7.4027.5983.5046.2992 x M101 x M1233.55
2CYC0820953.228 - 3.740 7.4028.3463.5046.2992 x M101 x M1234.50
2CYC0921053.622 - 4.134 8.2689.0943.5043.9372 x M101 x M1237.07
2CYC1021154.016 - 4.528 8.2689.8433.5043.9372 x M101 x M1238.10
2CYC1121254.409 - 4.921 9.25210.5913.5043.9372 x M101 x M1242.68
2CYC1221354.803 - 5.315 9.25211.3393.5043.9372 x M101 x M1243.70
2CYC1321455.197 - 5.709 9.84312.0873.5044.7242 x M101 x M1246.35
Cyclone II Part No.Cable Ø Range Take (mm)Dimensions mmWeight
(g)
SingleTrefoilQuadWHDPFixing Hole Ø
D1D2
2CYC02403436-5024-3421-29108.096.089.080.02 x M101 x M12519
2CYC03004145-6030-4126-35108.0109.089.080.02 x M101 x M12538
2CYC03704755-6937-4732-40128.0120.089.0100.02 x M101 x M12612
2CYC04305464-8043-5437-46128.0134.089.0100.02 x M101 x M12634
2CYC05006075-8850-6043-51148.0145.089.0120.02 x M101 x M12729
2CYC05606783-9956-6749-57148.0158.089.0120.02 x M101 x M12747
2CYC06307394-10863-7355-62168.0170.089.0140.02 x M101 x M12822
2CYC069080103-11869-8060-68168.0183.089.0140.02 x M101 x M12841
2CYC07208572-85188.0193.089.0160.02 x M101 x M12951
2CYC08209582-95188.0212.089.0160.02 x M101 x M12978
2CYC09210592-105210.0231.089.0100.02 x M101 x M121051
2CYC102115102-115210.0250.089.0100.02 x M101 x M121080
2CYC112125112-125235.0269.089.0100.02 x M101 x M121210
2CYC122135122-135235.0288.089.0100.02 x M101 x M121239
2CYC132145132-145250.0307.089.0120.02 x M101 x M121314

Newsletter

Sign up to our newsletter