Right Angled Adaptor Type 787 with Flameproof Ex d IIC & Increased Safety Ex e II forms of protection.
The CMP Type 787 Right Angled Adaptor is designed to protect cables when installed in confined spaces where the cable may otherwise be subject to excessive bending stress.
A General Purpose Industrial version is also available.
These Right Angled Adaptors are available with Male or Female connection threads and can also be supplied with thread conversion between the forward and rear threads to either a reduced size or a different thread type, e.g. Metric to NPT, or NPT to Metric. Please refer to the table D in the ordering guide tables detailed in the file Ordering Definitions below for further information on these options.
The CMP Type 787 Right Angled Adaptors are available in Brass, Aluminium or Stainless Steel and can be supplied for both Industrial and Hazardous Area applications, with Ex d & Ex e Component Approval.
787 Series 90° Adaptors Table
- View Metric Table
- View Imperial Table
| Ordering Reference | Male Forward Thread | Minimum Thread Length | Bore Diameter "D" | Female Rear Thread Size | Protrusion Length "A" | Width "B" | Installation Torque (Nm) | |
|---|---|---|---|---|---|---|---|---|
| Male to Female Version | Female to Male Version | |||||||
| 787DM2M2 | M20 X 1.5 | 15.0 | 14.0 | M20 X 15 | 30.4 | 39.5 | 26.0 | 7 |
| 787DM3M3 | M25 X 1.5 | 15.0 | 20.0 | M25 X 1.5 | 35.0 | 50.0 | 30.0 | 10 |
| 787DM4M4 | M32 X 1.5 | 15.0 | 26.3 | M32 X 1.5 | 47.0 | 60.0 | 37.5 | 15 |
| 787DM5N5 | M40 X 1.5 | 15.0 | 32.4 | M40 X 1.5 | 60.0 | 75.0 | 48.0 | 25 |
| 787DM6M6 | M50 X 1.5 | 15.0 | 43.8 | M50 X 1.5 | 79.3 | 96.2 | 60.0 | 30 |
| 787DM7M7 | M63 X 1.5 | 15.0 | 56.0 | M63 X 1.5 | 90.0 | 102.0 | 75.0 | 45 |
| 787DM8M8 | M75 X 1.5 | 15.0 | 68.0 | M75 X 1.5 | 95.0 | 108.0 | 85.0 | 45 |
| 787DM9M9 | M90 X 2.0 | 15.0 | 80.0 | M90 X 2.0 | 96.0 | 110.0 | 110.0 | 45 |
| 787DM10M10 | M100 X 2.0 | 15.0 | 91.0 | M100 X 2.0 | 100.0 | 120.0 | 115.0 | 45 |
| Dimensions are displayed in millimetres unless otherwise stated | ||||||||
Note: Marked with ATEX, IECEx & cCSAus certification details as standard. Other Thread Variations are available on request. Please refer to ordering guide tables in Ordering Definitions.
Note: Marked with ATEX, IECEx & cCSAus certification details as standard. Other Thread Variations are available on request. Please refer to ordering guide tables in Ordering Definitions.
| TECHNICAL DATA
Please click a logo to display it's certification information |
||||||||
|
|
||||||||
| cCSAus Approval Certificate No. | 1055233 |
| cCSAus Code of Protection Category | Ex de II; Class I, Groups A, B, C and D; Class I, Zone 1, AEx de II; IP66, 67, and 68, Enclosure Type 4X. |
| cCSAus Compliance Standards | C22.2 No. 0.5-M1982, C22.2 No. 30-M1986, C22.2 No. 94-M1991,CAN/CSA E60079-0:07, CAN/CSA E60079-1:07,CAN/CSA E60079-7:02, UL Standard 50, Eleventh Edition, UL Standard 1203, Fourth Edition, UL 60079-0, Fourth Edition, UL 60079-1, Fifth Edition, UL 60079-7, First Edition |
| GOST R Certificate Number | POCC GB.HO06.B00207 |
| GOST R Code of Protection Category | Ex d IIC / Ex e II / DIP A21 |
| GOST R Compliance Standards | ГOCT P 52350.0-2005, ГOCT P 52350.1-2005, ГOCT P 52350.7-2005, ГOCT MЭK 61241-1-1-99 |
| GOST GGTN Permit | PPC 00-40706 |
| GOST K Certificate Number | KZ 75000361 01 01 14761 |
| RoK Permit For Use Number | 19-02-UL-1957 |
| INMETRO Approval Certificate Number. | TUV 12.1335 U |
| INMETRO Code of Protection Category | BR-Ex d IIC / BR-Ex e II |
| INMETRO Compliance Standards | ABNT NBR IEC 60079-0:2006, IEC 60079-1:2007 e IEC 60079-2007:2001 |
| NEPSI Certificate Number | GYJ091017X |
| NEPSI Code of Protection Category | Ex d IIC / Ex e II |
| NEPSI Compliance Standards | GB3836.1-2000, GB3836.2-2003, GB3836.3-2000 |
| RETIE Approval Number | 03866 |
| Type | 787 |
| Design Specification | BS 6121:Part 1:1989, EN 50262:1999 |
| ATEX Certification Detail | SIRA01ATEX1284U |
| ATEX Code of Protection Category | ATEX  II 2 GD Ex d IIC & Ex e II - Component & Equipment,
Zone 1, Zone 2, Zone 21, & Zone 22 - Gas Groups IIA, IIB, IIC,
ATEX IM2 Ex d I, Ex e I |
| ATEX Compliance Standards | EN 60079-0, EN 60079-1, EN 60079-7, EN 50281-1-1 |
| IEC Ex Certification Detail | SIRA07ATEX0055U |
| IEC Ex Code of Protection Category | Ex d I / Ex e I / Ex d IIC / Ex e II / Ex tD A21 IP6X |
| IEC Ex Compliance Standards | IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0, IEC 61241-1 |
| Continuous Operating Temperature | -60°C to +200°C |
| Ingress Protection Rating | IP66, or IP68 when fitted with a CMP “O” Ring or Entry Thread Seal |
| Material | Brass, Electroless Nickel Plated Brass, Aluminium, Stainless Steel |
| Accessories | Locknut, Serrated Washer, Earth Tag, Entry Thread Seal |
Note: Versions with Male Parallel forward threads are, as an option, also available with an integral "O" Ring Seal. For such options please add the suffix letter "R" after the type number (787) in the ordering reference above, e.g. 787RDM2M2.
Additional information
